Sharp LC-24LE510K operation manual Manual Tuning, Managing Stations Channel List

Manual Tuning

HINT: This feature can be used for direct broadcast entry.

•Select Manual Channel Scan from the Installation menu by using “”/“” and OK buttons. Manual Scan options screen will be displayed.

•Select the desired Search Type using “” or “

” button. Manual search options will change accordingly. Use “”/“” button to highlight an item and then press “” or “” button to set an option. You can press “MENU” button to cancel.

Digital Manual Search

In manual channel scan, the number of the multiplex or frequency are entered manually and only that multiplex or frequency are searched for the channels. After selecting search type as Digital Aerial, you can enter the multiplex or frequency number using the numeric buttons and press OK button to search.

Analogue Manual Search

After selecting search type as analogue, you can use “”/“” button to highlight an item and then press “ ” or “” button to set an option.

Enter the channel number or frequency using the numeric buttons. You can then press OK button to search. When the channel is located, any new channels that are not on the list will be stored.

Analogue Fine Tune

•Select Analogue Fine Tune from the Installation menu by using “” or “” and OK buttons. Analogue

fine tune screen will be displayed. Analogue Fine Tune feature will not be available if there are no analogue channels, digital channels and external

sources stored.

•Press OK button to proceed. Use “” or “” button to set Fine Tune. When finished, press OK button again.

Clear Service List (*)

(*)This setting is visible only when the Country option is set to Denmark, Sweden, Norway or Finland.

Use this setting to clear channels stored. Press “” or “” button to select Clear Service List and then press OK. The following OSD message will be displayed on the screen:

Press OK to cancel. Select Yes by pressing “” or “” button and press OK to delete all of the channels.

Managing Stations: Channel List

The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options.

•Press “MENU” button to view main menu. Select Channel List item by using “” or “” button. Press OK to view menu contents.

Select Edit Channel List to manage all stored channels. Use “” or “” and OK buttons to select Edit Channel List.

English - 18 -

00_MB60_[GB]_1910UK_IDTV_PVR_NICKEL16_24942LED_YPBPR_ ROCKER_10072638_5018xxxx.indd 18 22.07.2011 16:56:39