IMPORTANT!
If you are located at a TV regional border or are able to receive broadcasts from more than one transmitter the “Choose Region” OSD will be displayed after the digital channels have been scanned.
To prevent poor quality pictures or unwanted regional variation from being stored in your main channel list you MUST! select your preferred regional options for each level where available, move the cursor to each option and press the Left/right arrow keys to view the available regions/transmitters.
The example below shows “UK” “England” “North West” have been selected as the regional options, after OK is pressed they can only be changed if “First time installation” is repeated. Received regional variations from the non selected region/transmitters will be stored from preset 800.
After all the available stations have been stored a channel list will be shown based on the broadcaster LCN press OK to accept this channel order and start viewing or use the Edit functions to change the order or delete unwanted channels.
English
Installation
Press “MENU” button on the remote control and select Installation by using “
” or “
” button. Press OK button and the following menu screen will be displayed.
Select Automatic Channel Scan (Retune) by using “
”/“
” button and press OK button. Automatic Channel Scan (Retune) options will be displayed. You can select Digital Aerial, Analogue or Digital Aerial- Analogue tuning using “
”/“
” and OK buttons.
Automatic Channel Scan (Retune) Menu Operation
Digital: Searches and stores aerial DVB stations.
Analogue: Searches and stores analogue stations.
Full: Searches and stores both analogue and aerial DVB stations.
•Whenever you select an automatic search type and press OK button, a confirmation screen will appear on the screen. To start installation process, select Yes, to cancel select No by using .“
” or “
” and OK button.
•After auto channel scan type is set and selected and confirmed, installation process will start and progress bar will move along. Press “MENU” button to cancel process. In such a case, located channels are not stored.
Manual Tuning
HINT: This feature can be used for direct broadcast entry.
•Select Manual Channel Scan from the Installation menu by using “
”/“
” and OK buttons. Manual Scan options screen will be displayed.
•Select the desired Search Type using “
” or “
” button. Manual search options will change accordingly. Use “
”/“
” button to highlight an item and then press “
” or “
” button to set an option. You can press “MENU” button to cancel.
-17 -
00_MB60_[GB]_1910UK_IDTV_PVR_BRONZE17_19942LED_YPBPR_ | 10072630_5018xxxx.indd 17 | 15.07.2011 13:38:09 |