Sharp LC-20VM2 operation manual AV1,2, Component mode, RGB mode, Adjustment, 13 US

Adjustment

AV1,2, COMPONENT mode

Selected item					Press VOL (–)					Press VOL (+)
CONTRAST					Decrease contrast					Increase contrast
3‰
TINT		–	+		Toward purple			–	+	Toward green
‰
COLOR					Lower color intensity					Higher color intensity
3‰
BLACK LEVEL–			+		Less bright			–	+	More bright
‰
SHARPNESS	–		+		Soft picture			–	+	Hard picture
‰
RED		–	+		Less red level			–	+	More red level
‰
BLUE		–	+		Less blue level			–	+	More blue level
‰
COLOR SYSTEM [ AUTO]				Press VOL (+) to select color system.
					→ AUTO → N358	→ N443	→ PAL → PAL-M → SECAM 

Note

The COMPONENT mode doesn’t contain TINT and COLOR SYSTEM. PAL60 is also displayed when the signal is received in PAL system.

RGB mode

	Selected item			Press VOL (–)			Press VOL (+)
CONTRAST				Decrease contrast			Increase contrast
	3‰
BLACK LEVEL–			+	Less bright	–	+	More bright
	‰
RED		–	+	Less red level	–	+	More red level
	‰
BLUE		–	+	Less blue level	–	+	More blue level
	‰

Note

If no button is pressed for more than approximately 30 seconds, the MENU setting is automatically cancelled and the display returns to the initial screen.

If VOL (+)/(–) is pressed after RESET is selected with SELECT, the factory setting is restored.

13 US