•To cancel an already set recording, highlight that programme and press the OK button and select the option “Delete Rec. Timer”. The recording will be cancelled.
Note: You cannot switch to any other channel or source while there is an active recording on the current channel.
Set Timer / Delete Timer
After you have selected a programme in EPG menu, press the OK button and and Options screen will be displayed. Select “Set Timer on Event” option and press OK button. You can set a timer for future programmes.
To cancel an already set reminder, highlight that programme and press the OK button. Then select “Delete Timer” option. The timer will be cancelled.
Note: It is not possible to record or set timer for two or more individual events at the same time interval.
First Time Installation
IMPORTANT: Ensure that the aerial is connected before switching on the TV for the first time installation.
•When the TV is operated for the first time, installation wizard will guide you through the process. First, language selection screen will be displayed:
•Use “
” or “
” buttons to select your language and press OK button to set selected language and continue.
•After selecting the language, “Welcome!” screen will be displayed, requiring you to set Country,Teletext Language and Scan Encrypted options.
•By pressing “
” or “
” button, select the country you want to set and press “
” button to highlight Teletext Language option. Use “
” or “
” button to select desired Teletext Language.
•Press “
” button after setting Teletext Language option. Scan Encrypted will be then highlighted. You can set Scan Encrypted as Yes if you want to scan coded stations.Afterwards select the desired Teletext Language.
•Press OK button on the remote control to continue and the following message will be displayed on the screen:
To select the “Yes” or “No” option, highlight the item by using “
” or “
” buttons and press OK button.
Afterwards, the following OSD will be displayed on the screen and the digital television will search for digital terrestrial TV broadcasts.
Note: You can press “MENU” button to cancel.
IMPORTANT!
If you are located at a TV regional border or are able to receive broadcasts from more than one transmitter the “Choose Region” OSD will be displayed after the digital channels have been scanned.
To prevent poor quality pictures or unwanted regional variation from being stored in your main channel list you MUST! select your preferred regional options for each level where available, move the cursor to each option and press the Left/right arrow keys to view the available regions/transmitters.
The example below shows “UK” “England” “North West” have been selected as the regional options, after OK is pressed they can only be changed if “First time installation” is repeated. Received regional variations from the non selected region/transmitters will be stored from preset 800.
English - 16 -
00_MB60_[GB]_(01_TV)_1910UK_IDTV_PVR_BRONZE17_24942LED_ | YPBPR_ROCKER_10072636_50186854.indd 16 | 17.08.2011 14:10:26 |