Sharp LC-19A33X-BK Preparation, Attaching the stand, Conﬁ rm the 3 screws supplied with the TV

Page 7

Preparation

Attaching the stand

•Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.

•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

CAUTION

•Attach the stand in the correct direction.

•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

Conﬁ rm the 3 screws supplied with the TV.

Screws (g3)

(used in step 2)

1 Insert the stand into the openings on the bottom of the TV.

2 Insert and tighten the 3 screws into the 3 holes on the rear of the stand.

Soft cushion

Screw

Hex key

NOTE

• To detach the stand, perform the steps in reverse order.

CAUTION

• Adjust the screen with both hands. Put one hand on the TV and tilt the screen while steadying the stand with your other hand.

To change the vertical angle of the TV, tilt the screen up to 2.5 degrees forward or 10 degrees backward.

Image 7

Contents LC-19A33X-BK LC-19A33X-WH Page Dear Sharp customer ContentsTeletext function Contents Watching TVSettings when using external devices Connecting a PCImportant Safety Precautions Trademarks Supplied accessoriesScrews g3 PreparationAttaching the stand Conﬁ rm the 3 screws supplied with the TVTV Front/Side Part namesTV/VIDEO button Preparation TV Rear Volume display when headphones are pluggedRegarding the headphone jack Preparation Remote control unit Bundling the cables Before turning on the powerConnecting the antenna cable Connecting the AC cordWhen using Hdmi cable Connecting external devicesConnecting a VCR, game console or camcorder Connecting a DVD playerYou can use the Input 4 PC terminal when connecting to a PC Preparation Connecting a Digital TV STB Set Top BoxDigital TV STB Set Top Box Inserting the batteries Using the remote control unitTurning the TV on/off Turning on the powerTurning off the power Power indicatorAbout Guide Display What is Menu? WUsing the control panel of the TVAbout Menu operations Basic Menu operationsDNR Press a/b to select Yes, and then press Setting channels automaticallyIf you have already set the password, enter it here Watching TVMenu language settings Selecting programmes Adjusting the volumeColour system See Sound system See Setting channels to your preferenceManual setting for each channel Auto searchColour system Watching TV Manual setting for each channelSearch tuning Fine tuningPress a/b to select Sort, and then press Sorting programmesSkipping channels Press a/b to select Skip, and then pressErase programme menus Watching TV Erasing programmesLabelling programmes Press a/b to select Label, and then pressOutputting only audio Using Mute e on the remote control unitUseful viewing functions Freezing the imageNicam TV broadcasts When receiving a stereo signal Watching TV Switching the analogue audio formatTV mode of A2 TV broadcasts When receiving a stereo signal When receiving a bilingual signalEnter the same 4-digit number as in to conﬁ rm Setting a passwordSetting a channel Resetting the passwordAuto power-off when there are no operations performed Energy conservation settingsOff 2 hr min hr min Mode1 Watching TV Power ManagementMode2 WSS signal 43 screen Mode Panorama Picture size settingsPress a/b to select On or Off, and then press Enter Auto Selection Mode menuWatching TV Selecting the picture size manually Manual SelectionHdmi input mode Selecting a preset AV ModeUsing AV Mode on the remote control unit Press AV ModePicture adjustment Manual picture settingsOPC indicator P Setting Watching TV Advanced picture settingsColour Temp. Colour Temperature Film ModeRotating the image Other picture settingsAdjusting the image position DNR Digital Noise ReductionSound Wide Audio adjustmentPress Menu to exit Press a/b to select the desired item, and then press Enter Settings when using external devicesSettings when using Hdmi output devices Connecting an Hdmi output deviceLabelling input sources Using TV/VIDEO on the remote control unit or on the TVUsing PC on the remote control unit Selecting input sourceFactory preset value is Auto Colour system settingsUse the PC terminals to connect a PC Connecting a PCSignal names for 15-pin mini D-sub connector Displaying a PC image on the screenNormal Full Dot by Dot Connecting a PC Selecting the picture sizeYou can select the picture size as illustrated below Press Wide or a/b to select a desired item on the menuPhase Connecting a PC Adjusting the PC image automaticallyClock Selecting the input resolution Input resolution settings? ? ? Communication procedurePC Control of the TV Communication conditionsCommands PC compatibility chartRS-232C commands list Resolution Horizontal VerticalAbout Teletext Teletext functionDisplaying Subpages Displaying SubtitlesTeletext language setting Problem Possible Solution TroubleshootingAppendix Press a/b to select Yes and then press ResetModel LC-19A33X SpeciﬁcationsDimensional drawings Password is Clearing the PasswordMemo Memo