Sharp LC32SB27UT Attaching/Detaching the Stand, Setting the TV on the Wall, Hanging on the wall

Page 7

QUICK REFERENCE

Attaching/Detaching the Stand

Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.

Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

CAUTION

Attach the stand in the correct direction.

Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.

Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

1Confi rm that there are 4 screws supplied with the stand unit.

21 Insert the stand into the openings on the bottom of the TV.

Be sure to attach the stand to the TV with the wider side of the base facing forward.

2 Insert and tighten the 4 screws into the 4 holes

on

of the stand.

Soft cushion

 

 

Forward

 

1

Screws

2

• To detach the stand, perform the steps in reverse order.

Setting the TV on the Wall

CAUTION

This TV should be mounted on the wall only with the AN-37AG5 (SHARP) wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

You can ask a qualifi ed service professional about using an optional AN-37AG5 bracket to mount the TV to the wall.

Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall

AN-37AG5 wall mount bracket.

(See the bracket instructions for details.)

Vertical mounting

Angular mounting

About setting the TV angle

0/5/10/15/20°

• The center of the display:

 

5/16 inch (7.5 mm) above

 

the “A” position.

 

• Refer to the operation

 

manual of AN-37AG5 for

 

details.

Detach the cable clamp on the rear of the TV when using the optional mount bracket.

Due to the terminal confi guration on this TV, when you wall-mount this model, make sure there is enough space between the wall and the TV for the cables.

To use this TV mounted on a wall, fi rst remove the adhesive tape at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.

7

Image 7
Contents LC-32SB27UT Supplied Accessories09P06-MX-NM For connectionsImportant Information Dear Sharp Customer Additional Safety InformationPrecautions when transporting the TV Child Safety Attaching/Detaching the Stand Setting the TV on the WallUsing an optional bracket to mount the TV About setting the TV anglePower indicator on the front of the television lights Green Using the Remote Control UnitAntennas Installing Batteries in the Remote Control UnitConnecting Antenna Cable PreparationInput button Part NamesTV Front TV Rear/SideConnecting a PC Connecting to External EquipmentInitial Setup Turning On/Off the PowerWatching TV Changing Channels Changing VolumeSleep Timer Direct Button OperationExample MTS/SAP stereo modeDigital broadcasting audio mode Direct Button OperationOperating On-Screen Display Menu Press InputPress Input again or press a/b to select the input source Press CCFor HD programs Press View ModeFor PC input mode You can select the screen sizeOn-Screen Display Menu Operation Using the remote controlUsing the control panel of the main unit On-Screen Display MenuOPC Setting Advanced Picture SettingPicture Menu Audio Menu Power Control MenuInput Skip Setup MenuEZ Setup CH SetupHdmi Auto View PC SetupPosition PC Audio SelectLanguage Audio SetupReset Parental Ctrl Parental Control SettingRating When setting an individual content-based rating itemOn-Screen Display Menu Mpaa Voluntary movie rating system TV Parental GuidelinesReactivating the temporarily released V-CHIP Block How to temporarily release the V-CHIP BlockCanadian English Ratings Canadian French RatingsOption Menu Identification Favorite CH Favorite Channel SettingDemo Mode Software Update Operation Lock OutRemove the USB memory device During the data checking, Checking blinksPress Enter to start updating After the screen shown below is displayed, pressProblem Possible Solution TroubleshootingTroubleshooting-Digital Broadcasting Error message about reception of broadcastModel LC-32SB27UT Optional AccessorySpecifications AppendixSecret number is PC Compatibility ChartLimited Warranty Calling for Service