Preferences
DEFAULT
If you choose RESET and press SELECT, the factory- presets are loaded. Parental level and parental password does not change.
DOWNMIX
This mode can be selected when the digital audio output of the TV is used.
SURROUND: Surround sound output.
STEREO: Two channels stereo. PARENTAL (Parental Level)
Playing some DVDs can be limited depending on the age of users. The “Parental Control” function allows playback limitation level to be set by the parent.
Parental Level can be adjusted to one of the eight levels. Level “8 ADULT” adjustment let you watch all of the DVD titles ignoring the DVD disc’s parental level. You can watch the DVD discs, which has the same or lower parental level than the player’s level only.
PASSWORD (Change Password):
Using this item you can change the current password.
To change the password you will be prompted to enter your old password. After you have entered your old password, you can now enter the new
You can use C key to delete the incorrect entry.
Note: Factory preset of the password is “0000”. You have to enter XXXX digital password every time you want to change the parental level. If you forget your password please contact technical service.
Troubleshooting
The picture quality is poor (DVD)
•Make sure the DVD disc surface is not damaged. (Scratch, fingerprint etc.)
•Clean the DVD disc and try again.
See instructions described in “Notes on Discs” to clean your disc properly.
•Ensure that the DVD disc is in the drawer with the label uppermost.
•A damp DVD disc or condensation may effect the equipment. Wait for 1 to 2 hours in
Disc does not play
•No disc in the machine. Place a disc into the loader.
•Disc incorrectly loaded.
Ensure that the DVD disc is in the drawer with the label uppermost.
•Wrong type of disc. The machine cannot play CD- ROMS etc.
•The region code of the DVD must match the player.
Wrong OSD language
•Select the language in the
•The language for the sound or subtitles on a DVD cannot be changed.
•Multilingual sound and/or subtitles not recorded on the DVD.
•Try to change the sound or subtitles using DVD’s title menu. Some DVD’s do not allow the user to change these settings without using the disc’s menu
Some functions (Angle, Zoom etc) do not work
•These functions are not available on the DVD.
•Angle can only be changed when the angle symbol is displayed.
No picture
•Have you pressed the correct buttons on the remote control? Try once more.
No sound
•Check the volume is set to an audible level.
•Make sure you have not switched the sound off accidentally.
Distorted sound
•Check that the appropriate listening mode setting is correct.
English - 35 -
|
| 6 | 27.08.2010 15:02:19 | |
|
| |||
|
|
|
|
|