Other Setting Functions

EXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTION

-HDMI TM. The HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing.

-This TV can receive the High-Definition Multimedia Interface (HDMI).

-This TV supports HDCP (High-bandwidth Digital Contents Protection) Protocol for 720x480p, 1280x720p and 1920x1080i resolution.

-When you connect this TV with a source device (DVD player, Set Top Box or PC) supporting Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.

-If the source device does not support Auto HDMI, you need to set the output resolution appropriately.

To get the best picture quality, adjust the DVD Player or Set Top Box’s output resolution to 1280x720p, and the PC graphics card’s output resolution to 1024x768, 60Hz.

-If the source device has an HDMI output, no other audio connection is necessary because HDMI-to-HDMI connecting includes both video and audio.

How To Connect

1.Connect the source device to HDMI port of this TV with an HDMI cable (not supplied with this product).

2.No separated audio connection is necessary.

How To Use

-If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.

-If the source device does not support Auto HDMI, you need to set the output resolution appropriately.

To get the best picture quality, adjust the output resolution of the source device to 1280x720p.

-Select HDMI input source by using SOURCE button.

How To Set

The method to set is similar to TV.

You can connect outside signal source VCR, VCD DVD, PC equipment to the TV set.

Antenna Input

1.Connect the VCR radio frequency input to the side radio frequency input of the LCD.

2.Connect the antenna to VCR antenna input.

3.Press SOURCE button to select TV mode.

4.Press PLAY button in VCR to start watching.

S-VIDEO input

If you use S terminal as signal input source, the image quality will be better than video (AV). 1.Connect S terminal output in DVD to S terminal

input in TV set.

2.Connect S terminal left/right audio output in DVD to the relevant port in TV set.

3.Press SOURCE button repeatedly until the display mode is S-VIDEO.

4.Press PLAY button in DVD to broadcast. At this time the image programs in DVD will broadcast in TV set.

YPbPr input

1.Component terminal (Y/PbCb/PrCr) connect to the component output of picture output device (such as DVD, TUNER and so on ), the sound is input from AUDIO IN:

2.Press SOURCE button to select YPbPr mode. 3.Press PLAY button on the external device to start

watching.

SCART input

1.Connect AUDIO OUT in the VCD/DVD to the AUDIO/VIDEO port in the SCART commutator in the accessory.

2.Connect the SCART commutator in the accessory to the SCART1 or SCART2 in the TV set.

3.When SCART commutator select INPUT, it will enter video input status, when SCART commutator select OUTPUT, it will enter video output status.

4.Press SOURCE button to select SCART1 or SCART2 mode.

5.Press PLAY button in VCD/DVD to start watching. Note: please never use the S terminal in commutator.

HDMI input

1.Connect HDMI signal source output to the HDMI input in this TV set.

2.Press SOURCE button to select HDMI mode. 3.Press PLAY button on the external device to start

watching.

ANT.

L	R
		S-VIDEO
AUDIO IN		IN

L R

AUDIO IN Y Cb/Pb Cr/Pr

AUDIO AUDIO S-VIDEO VIDEO