VGA Menu Setup
The VGA mode supported up to 1920X1080@75Hz(for 24"), you can use this unit as a multimedia PC monitor. When this unit works in VGA mode, the following setup can be done.
Press [SETUP] button to enter main section. Press [
] button to select sections and then press [ 
] button or [OK] button to enter. If all is complete, please press [SETUP] button twice to exit and your setup data will be saved automatically.
V G A S E T T I N G
Select VGA SETTING item to adjust such parameters as Contrast, Brightness,
NOTE
VGA SETTING
Contrast
Brightness
Frequency
Phase
Auto Adjust
Select OK
75
50
50
50
0
60
Enter | SETUP Return |
When your PC goes into standby mode, the screen will show as right side. This unit will go into sleep mode if no signal input for 5 minutes. In this mode, the indicator will remain green, and the screen will turn off. You can wake it up by waking up your PC or pressing [SETUP] or [SOURCE] button on the remote control.
VGA
NO SIGNAL
1 : 50
S O U N D
Select SOUND item to adjust sound parameters. You may adjust Sound Mode, Treble, Bass, Balance, Auto Volume and Surround Sound.
Sound Mode item can be changed between Music, Film, News, User.
Auto Volume item enables you to adjust Off or On for control volume automatic.
Surround Sound item enables you to select Off or On for surround sound.
SOUND
| Sound Mode | Standard |
| Treble | 75 |
| Bass | 50 |
| Balance | 50 |
| Auto Volume | Off |
| SurroundSound | Off |
Select | Adjust | SETUP Return |
28 | 24" HD Ready 1080p DVD LCD TV User Guide |