teac english manual 17.pdf 24/03/2009 16:01:09
TV MENU OPERATION
TUNING SETTINGS MENU
Program Edit / Changing Channel Position (Only Freeview & Analague TV modes) You can change the analogue channel position to suit your requirements.
1)Press [MENU] to enter menu
2)Press [>] to move to Tuning Settings Menu
3)Press [\/] to highlight Program Edit
4) Press [>] to enter the program edit menu
5a) Freeview mode – Press the [Green] button to add the selected channel to your favorite, press it a second time to remove. Press the [Yellow] to delete the channel from the list. WARNING – this will remove the channel complete from the TV. Press [Blue] to lock a channel (to do this the Child Lock function must be set “ON”)
5b) Analogue TV mode – Press the [>] to select the change you wish to move. Move to the new location and press [OK]
BBC1
BBC2
ITV1
CH4
CH5
ITV2
BBC3
BBC4
BBC1
BBC2
ITV1
CH4
CH5
To swap channel press 
on remote move to the desired location and press 
6) Press [EXIT] to exit
Common Interface Slot (Only in Freeview Mode)
Pay per view services require a “smartcard” to be inserted into the TV. If you subscribe to a pay per view service the provider will issue you with a ‘CAM’ card “smartcard”. The CAM can then be inserted into the COMMON INTERFACE PORT (see page 8). To access the card follow the steps below.
1)Press [MENU] to enter menu
2)Press [>] to move to Tuning Settings Menu
3)Press [\/] to highlight Common Interface
4)Press [>] to enter the menu
5) Press [EXIT] to exit
20