How to Add a Channel to a Favourites List
•By pressing “
” or “
” buttons, highlight the channel that you want to add to the favourite list.
•By pressing OK button, the highlighted channel is added to the Favourite List.
•F icon indicates that a channel is added to Favourite List.
Removing a Channel from Favourite List
•Highlight the channel that you want to remove from the favourite list and press OK button to remove.You can press OK button again to
•To activate Favourites, go to the Configuration menu and select Favourite mode. Use “
” / “
” to set Favourite mode as on. To cancel Favourites, set Favourite Mode to Off.
On Screen Help
For all menus, press the INFO/
button to display the help information about the menu functions.
Program Guide
This section is same with the instructions given in the General Operations page. Please see Electronic Programme Guide (EPG) section in the General Operations part.
Timers
To display timers window, activate the item from the main menu. To add a timer, press the YELLOW button on the remote control. Then “Add Timer” window appears.
Channel: “
” or “
” keys will navigate the user through the TV or Radio list.
Date: Starting date is entered via the Left/Right or the numeric buttons.
Start: Starting time is entered via the Left/Right or the numeric buttons.
End: Ending time is entered via the Left/Right or the numeric buttons.
Duration: Duration between Start and End time.
Repeat: You can set a timer to be repeated as Once, Daily or Weekly.
Change/Delete: permits or prohibits any modifications for other users.
You can save the adjustments by pressing the GREEN key or cancel the process by pressing the RED button. You can edit the list via GREEN key and delete with the RED button.
Conditional Access
•Press the M button to display the main menu and use the “
” or “
” button to highlight the “Conditional Access” line and press the OK button:
Some Digital Terrestrial channels operate on a Pay Per View basis. These require a subscription and a hardware decoder.
Obtain the Conditional Access Module (CAM) and the viewing card by subscribing to a pay channel company, then insert those to the TV using the following procedure.
•Switch off the TV and unplug from the mains.
•Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the
•The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.
•Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated.
•Some CAMs may require the following set up. Please set the CAM by entering the IDTV menu, Conditional Access then pressing the OK button. (CAM set up menu is not displayed when it is not required.)