BASICTVOPERATIONSETUP
When you turn on your television set for the first time, be sure to place it on a solid stable surface. To avoid danger, do not expose the TV to water or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear and be sure to leave sufficient gaps around the unit as shown.
| 4" |
4" | 4" |
TURNING THE UNIT ON FOR THE FIRST TIME
The first time you turn the unit on, it will go straight into Auto scan mode. Simply follow the screen prompts as below to tune in the channels.
1.Use the 
/ 
button to select the screen menu language you prefer.
2.Use the 
button to highlight Auto Tuning and press the ENTER/OK button to enter Auto Tuning menu.
NEW INSTALLATION
LanguageEnglish
Auto Tuning
EXIT EXIT | TV RETURN OK ENTER |
3. Use the 
/ 
button to select the Country you are in.
4. Use the 
button to move to Start. Press the ENTER/OK button to confirm Start. The system will
automatically start to scan and preset all available programmes.
TV
5. After scanning has finished, the TV will display the first programmes stored.