THLMENU RULE: POINT AND SELECT
You only need to know one rule to use the
WHAT IS POINT AND SELECT?
The point and select method has two steps.
1.Point to a menu item using the MOVE arrows on the remote. (The CHAN/VOL buttons on the remote.)
2.Select a menu item by pressing MENU.
Selecting an item tells the TV's menu system to go ahead and make the change or go to a place you have indicated. (You can
also select an item by pressing the corresponding number button on the remote.)
Once you know how to point and select your way through the menus, you can apply this rule in the menu control panels, which do the real work in the menu system.
The setup fuuL,ne w,_lk_ yuu Lhrough the steps needed to configure the TV. These steps allow you to select a menu language, complete the auto channel search, which puts available cable TV or antenna signals into the TV's memory, label the channels and set the parental controls. After you select a menu language, you can skip any of the remaining steps and return to them later.
BEGIN SETUP
1.Press MENU to bring up the Main menu.
2.Point to Setup and press MENU. The first Setup screen comes up, asking you to select a language.
3.Point to your preferred language by pressing the up and down arrows until the language is highlighted in green.
4.Press MENU to select the language.
5.A screen appears asking if you would like the TV to search for all channels.
6.Complete the Setup routine or skip any of the steps and return to them later.
VOL CHAN VOL
CHAN
MENU
Setu
Setu
3