Sansui SLEDVD226 owner manual Labeling channels, To create channel labels

5

6

PC

:Select :Adjust

HDMI

Component

Video

Video Label

Press ◀ or ▶ to select the desired label for that input source.

Press ▲ or ▼ to select an input which you want to label.

Select “Setup”, then press ▶ or ENTER.

Press ▲ or ▼ to select “Video Label”, then press ▶ or ENTER.

The Video Label feature allows you to label each input source for your TV.

1

2

3

4

To clear a Ch Label

After step 3 above, press ▲ or ▼ to select “Label Clear”, then press ▶ or ENTER.

NOTE:

• The channel labels will be reset after “Automatic Search” on page 18.

Labeling video inputs

Repeat steps 3-4 for other channel.You can assign a label to each channel.

When you finish inputting the label name, press EXIT to return to the normal screen.

- , () @ / + = -

SPACE

If the character which you desire appears, press

ENTER.

Repeat this step to enter the rest of the characters. If you would like a blank space in the label name, you must choose the empty space from the list of characters.

The characters rotation as follows:

-

-

-

-

4

This TV will allow you to view the digital signal meter for digital channels.

1 Select “Channel”, then press ▶ or ENTER.

2 Press ▲ or ▼ to select “DTV Signal”.

3 Press ▶ or ENTER to check the digital signal strength.

The digital signal strength screen will appear.

If necessary, adjust the direction of the antenna to obtain the maximum signal strength.

Checking the digital signal strength

:Select

ENTER :Set

Clear All

>>

Add/Delete

>>

Adding Channel

>>

CH Add/Delete

Press ▲ or ▼ to select “Clear All”, then press ▶ or

ENTER.

Press ▲ or ▼ to select “Add/Delete”, then press ▶ or ENTER.

All channels are deleted from the channel memory. 1 Select “Channel”, then press ▶ or ENTER.

2

3

Clear All

CH DTV Signal

0 50 100

Signal Level

NOTE:

• Signal meter feature is not available for analog channels.

• After 240 seconds, DTV Signal screen will return to normal TV operation automatically.

Labeling channels

Channel label appear with the channel number display each time you turn on the TV, select a channel, or press DISPLAY.

You can choose any four characters to identify a channel.

To create channel labels

1 Select “Channel”, then press ▶ or ENTER.

2 Press ▲ or ▼ to select “Ch Label”, then press ▶ or ENTER.

The Ch Label menu will appear.

3 Press ◀ or ▶ to select a channel you want to label, then press ▼.

CH Ch Label

Channel Number	15-1
Ch Label	CH-1
Label Clear	>>

:Select :Adjust

Press ◀ or ▶ repeatedly until the character you				ENGLISH
want appears in the first space.
CH Ch Label
	Channel Number		15-1
	Ch Label		CH-1
	Label Clear		>>
	:Select	:Adjust	ENTER :Set

–/ VCR / DVD / STB / Cable / Satellite / Receiver / Game / Camcorder / PC / DVI PC / Blu-ray

19