DVD PLAYER OPERATION
Basic Operation
1.Press “TV/AV/DVD” button on the unit or press the DVD MODE direct key on the remote handset to turn ON DVD.
2.Press “OPEN / CLOSE (EJECT)” button to load disc in disc tray.
3.Press “OPEN / CLOSE” button to close the tray.
•Hold the disc without touching either of its surfaces, position it with the printed title side facing up.
Play Discs
1.Press the OPEN/CLOSE Button on the front panel and load the Disc on the tray.
The label side should be facing upwards. For a
2.Press the OPEN/CLOSE button again to close the tray and the disc will be loaded.
3.The Disc will be played automatically.
•If it is a DVD disc, it will show the Menu/Title Page on the screen.
•If it is a CD, it will play the first track directly.
4.Press the STOP Button if you want to stop the Disc playback. You can resume playback by pressing the PLAY button and it will start at the location where you have pressed stopped (Resume Play).
5.Press the STOP Button twice to have the Disc really stopped.
(Pause)/ Step
This function is applicable for DVD and CD audio.
•For DVD, the picture will become static.
•For CD audio, it will become silent.
1.Press the ( ) Button will cause the player to enter PAUSE/STEP mode.
2.Press the PLAY Button again will resume to Play State.
DVD Setup Mode
•Setup Mode provides the menu for the configuration of General setup page, Speaker setup page, Dolby Digital setup, Preference page.
•Item selection in the SETUP menu is done by using the Navigation Arrow and the ENTER button.
•To exit the SETUP Mode to press the SETUP button again. Note: To setup the TV display mode must be in stop mode.
11