Setup
Connections
If your TV has AUDIO/VIDEO input jacks, see the following instructions.
Connection to a TV
Basic Audio
TV
AUDIO IN
LR
(INPUT)
Audio cable (supplied)
Method 1
Good picture
VIDEO IN
Video cable (supplied)
Method 2
Better picture
| ||
or | cable | |
(commercially | ||
| ||
| available) |
Setup
This unit
(OUTPUT)
R | AUDIO L DIGITAL AUDIO OUT COAXIAL |
| OUT |
| VIDEO OUT |
| |
| TO SPEAKER |
R | AUDIO L |
| OUT |
(Analog)
AUDIO OUT
VIDEO
OUT
VIDEO OUT
OUT
Hint
•Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy protection system.
After you have completed connections
•Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel (usually near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual accompanying your TV.
INPUT MODES FOR COMMON TV BRANDS (Example)
•Listed below are inputs for common brand name TV’s.
Admiral:AUX
Curtis Mathis: | LINE1, LINE2, 00, 90, 91, 92, 93 |
GE: | INPUT, TV/VCR, 00, 90, 91, 92, 93 |
Hitachi: | INPUT, AUX |
JVC: | VIDEO, VIDEO1, VIDEO2, VIDEO3 |
Kenwood: | AUX |
00 | |
Magnavox: | AUX CHANNEL |
Panasonic: | TV/VIDEO |
RCA: | INPUT, TV/VCR, 00, 90, 91, 92, 93 |
Samsung: | TV/VIDEO |
Sanyo: | VIDEO |
Sharp: | 00 |
Sony: | VIDEO1, VIDEO2, VIDEO3 |
Toshiba: | TV/GAME |
Zenith: | 00 |
Connection to RF Modulator
If your TV has Antenna in jack only, it is still possible to connect this unit to your TV by using a STEREO AUDIO/VIDEO RF modulator (commercially available). In this case, follow the instructions below.
1)Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/VIDEO input jacks of your RF modulator by audio and video cables.
2)The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then connect the RF cable to your RF modulator (usually marked “ANT IN”).
3)Connect your RF modulator to your TV by another RF cable.
4)Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a Modulator/Antenna switch, set it according to your RF modulator’s manual.
5)Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.For more details, follow the instructions supplied with the RF modulator.
Cable | Antenna |
|
|
|
| (Back of this unit) | |||
Signal |
|
|
|
|
|
|
|
| (Back of TV) |
|
|
|
|
|
|
|
|
| |
| STEREO AUDIO/VIDEO RF Modulator | 1 | VIDEO OUT | AUDIO OUT L | |||||
|
| 3 | 4 | R | L | ||||
| (commercially available) |
|
|
|
|
|
| ||
| AC 120V ANT IN | CHANNEL TO TV | VIDEO AUDIO |
|
|
|
| ||
|
|
|
|
|
| Audio/Video |
|
|
|
|
|
|
|
|
| Cables |
|
|
|
|
|
|
|
|
| (Supplied) |
|
|
|
| 2 |
|
| 3 | RF Cable (Not supplied) |
|
| ||
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| Antenna in jack | |
|
|
|
|
|
|
|
|
| |
Hint
•The quality of picture may become poor if the unit is con- nected to an RF modulator.
– 6 – | EN |