Sansui HDLCD1900A manual Connections to other equipment, To connect the LCD TV to a VCR

Connections to other equipment

The exact arrangement you use to interconnect various video and audio components to the LCD TV is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.

The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment of components. The diagrams are intended to show component video and audio interconnections only.

To connect the LCD TV to a VCR

Rear of the LCD TV

@@@.4.1,--

@@@cN.,=o-,

To AudioNideo		OUT	]
Audio/Video cord	G
(not supplied)

To VIDEO/AUDIO (L/R) IN

To connect the LCD TV to a VCR with an S-Video cord

If you connect aVCR with a S-Video cord to the S-VIDEO IN jack on the LCD TV, you must also connect the audio cords to the VIDEO/AUDIO(L!R) IN jacks. The S-Video cord only carries the video signal. The audio signal is separate.

Rear of the LCD TV				To S-Video		OUT
		To S-VIDEO IN
I	@ @1-'g	I	S-Video cord	(not supplied)		i/_
I_@qL?_		_	Audiocord(notsupplied)		(_
		To VIDEO/AUDIO	(L!R) IN		To Audio OUT

NOTE:

•When the S-Video cord and the video cord are connected to each jack at the same time, the S-Video cord takes precedence over the video cord.

To connect the LCD TV to a DVD player/Satellite receiver

If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown.

Rear of the LCD TV

	To S-VIDEO IN		To S-Video	OUT
	÷@¢1
I	@ @1-@	cord	(not supplied)	r,,/.	%
	S-Video
				I	i i i i d
					/
	Audio	cord	(not supplied)
	To VIDEO/AUDIO (L!R) IN		To Audio	OUT

12