Sansui HDLCDVD325 Connections to other equipment, To connect a Hdmi or a DVI device to the unit

Connections to other equipment (continued)

To connect a HDMI or a DVI device to the unit

The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.

When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.

Rear lower left of unit

HDMI cable (type A connector)

HDMI device

(not supplied) To HDMI out

or

HDMI - to - DVI adapter cable (HDMI type A connector)

(not supplied)

To DVI output DVI device

Audio cord (not supplied)

NOTE:

You must choose an appropriate setting for each connection (see page 35. “Selecting the HDMI audio input source”).

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below.

Rear lower right of unit		Front
	Subwoofer	Speaker
		(Right)

TV/DVD

Front

Coaxial Digital Audio Output Speaker

(Left)

Coaxial digital cable (not supplied)

To Coaxial Digital Audio Input

AV Amplifier with built-in digital surround decoder as listed above

Center Speaker

Surround	Surround
Speaker (Left)	Speaker
	(Right)

NOTES:

•When you make the connection above, on the AV Amplifier, do not set DOLBY DIGITAL to DOLBY DIGITAL, or MPEG to MPEG “ON”. If you do, a loud noise will emit from the speakers possibly causing damage to your hearing or to the speakers.

•Some DTS decoders do not support DVD-DTS interface, and may not work properly with the unit.

60