Connections & Setup
CHAN
VOLVOL
CHAN
MENU
Use the CHAN ^/v and VOL +/- buttons along with the MENU button to move through the menu system.
TO RUN AUTOMATIC
TUNING NOW
PLUG THE ANTENNA
NO 
YES
Plug in the TV
Plug the end of the power cord into the wall outlet. Make sure to insert the plug completely into the outlet.
Put Batteries in the Remote
1.Remove the battery compartment cover on the remote.
2.Insert new batteries. Match the polarities (+ and
3.Put the battery compartment cover back on the remote.
How to Use the Remote Control to Complete Setting Up the TV
The technical term is “Navigation” – how you move through the
To highlight a menu item, use the CHAN ^/v buttons to move up or down. Use the VOL +/- buttons to select an item or change its setting.
Press MENU to select an item.
Note: Highlighted means that the menu item stands out from other menu items on the list (appears darker, brighter, or a different color).
Turn on the TV
Press the POWER button on the remote control or on the TV itself.
Automatic Tuning
The first time you turn on your TV the screen shown on the left appears.
Your TV can search for all channels that are viewable through your antenna or
1.Make sure you have either an
2.Press VOL+ begin the automatic tuning.
Your TV automatically cycles through all channel numbers and places the active channels into channel memory. When your TV is finished, it tunes to the lowest channel in its channel memory.
3.Press CHAN ^ or CHAN v to access the channels in the channel list. The channels can also be accessed using the number buttons on the remote.
Note: If you change your location or cable company, you will need to Memorize Channels again.
Chapter 1 | 9 |