Sony SLV-X817PS, SLV-X817ME, SLV-X717ME, SLV-X717SG Recording Timer recording Others Symptom Remedy

Page 39

Recording

Timer recording

Others

Symptom

Remedy

No TV programmes appear

• Make sure the TV is set to the video channel. If you

on the TV screen.

are using a monitor, set it to video input.

 

 

 

 

 

 

TV reception is poor.

• Adjust the TV aerial.

 

• Make sure the TV system is correctly set for your TV.

 

 

 

 

 

 

The tape starts playing as soon

• The safety tab has been removed. To record on this

as it is inserted.

tape, cover the tab hole.

 

 

 

 

 

 

The tape is ejected when you

• Check that the safety tab has not been removed.

press r REC.

 

 

 

 

 

 

 

 

 

 

 

Nothing happens when you

• Make sure the tape is not at its end.

press r REC.

• Select the correct source with the INPUT SELECT

 

buttons. Select a programme position when recording

 

TV programmes; select “L1” or “L2”when recording

 

from other equipment.

The timer does not operate.

• Check that the clock is set.

 

• Make sure a tape has been inserted.

 

• Check that the safety tab has not been removed.

 

• Make sure the tape is not at its end.

 

• Make sure a programme has been set for timer

 

recording.

 

• Make sure your timer settings have not already passed

 

the current time.

 

• The clock stops if the VCR is disconnected from the

 

mains for more than an hour. Reset the clock and

 

timer.

No tape can be inserted.

• Check that a tape isn’t already in the tape

 

compartment.

 

 

 

 

 

 

The remote commander does

• Make sure you are pointing the remote commander at

not function.

the remote sensor on the VCR.

 

• Replace all the batteries in the remote commander with

 

new ones if they are weak.

 

• Make sure the

 

/

 

remote control switch is

 

TV

VIDEO

 

set correctly.

 

 

 

 

 

 

 

 

 

 

The tracking indicator does not

• The recording condition of the tape is very poor and

appear on the screen.

tracking cannot be adjusted, or the NTSC system is

 

being used.

 

 

 

 

 

 

The VCR needs to be cleaned.

• Clean the cabinet, panel and controls with a dry, soft

 

cloth, or a soft cloth slightly moistened with a mild

 

detergent solution. Do not use any type of solvent,

 

such as alcohol or benzine.

Additional Information 39

SLV-X817/717ME/PS/SG 3-858-651-11 (1)

Page 38 Page 40
Image 39
Page 38 Page 40
Contents SLV-X817/717ME/PS/SG 3-858-651-11 Video Cassette RecorderCompatible colour systems PrecautionsSafety InstallingTable of contents Unpacking Checking your model nameGetting Started To operate Set Setting up the remote commanderUsing the remote commander Inserting the batteriesTo mains Lead Signal flowAerial cable supplied Connecting the VCRAdditional connections To a TV that has phono type audio/video input jacksTo a stereo system SLV-X817 only Tuning your TV to the VCR To obtain a clear picture from the VCR To check to see if the TV tuning is correctBefore you start Selecting a languageBefore you start… Setting the clockTip Setting the clockPresetting all receivable channels automatically Tuning the VCRTuning the VCR PROG+ Presetting channels manuallyChannel coverage System D/K System B/G PositionIf the picture is not clear Disabling unwanted programme positionsSLV-X817 Playing a tapeBasic Operations SLV-X717Basic Operations Additional tasksReplaying a recently watched scene To set the colour systemTo play an NTSC-recorded tape To use the time counterIf your TV is Set Ntsc PB to How to connect to use this function OperationBasic Operations SLV-X817/717ME/PS/SG 3-858-651-11 Prog + REC Recording TV programmesRemaining tape length 00 22 Time counter To stop recordingTo check the remaining tape length To watch another TV programme while recordingTo save a recording To record Ntsc colour system programmesTips On/standby Recording TV programmes using the timerRecording TV programmes using the timer Daily/weekly recording To use the VCR after setting the timerSLV-X717 · P L a Y Playing/searching at various speedsTo resume normal playback Additional OperationsReverse Tip Using the Click Shuttle ring SLV-X717 onlyClick Shuttle ring Slow motion Reverse High speed Double speedTo extend the duration Recording TV programmes using the quick timerChecking Changing/ cancelling timer settings When the timer settings overlapProgramme Will be cut off Seconds Seconds will be cut off Recording stereo programmes SLV-X817 only Selecting the sound during playbackHow sound is recorded on a video tape Adjusting the picture Adjusting the trackingAbout Adaptive Picture Control APC Changing menu options Menu choicesMenu option Set this option to This VCR Recorder How to connect to record on this VCRVMC-810MS audio/video cable not supplied Signal flow Editing with another VCROperation When recording on this VCR Before you start editingTo stop editing For SLV-X817 To stop while editingTo listen to both the hi-fi and normal audio SLV-X817 only Symptoms caused by contaminated video heads TroubleshootingRecording Timer recording Others Symptom Remedy Inputs and outputs SpecificationsSupplied accessories SystemFront panel SLV-X717 Index to parts and controlsPROGRAM/TRACKING + Front panel SLV-X817Rear panel Display windowRemote commander SLV-X817/717ME/PS/SG 3-858-651-11 Index J, KV, W, X, Y, Z

SLV-X817ME, SLV-X717PS, SLV-X717SG, SLV-X817PS, SLV-X717ME specifications

The Sony SLV series of VCRs, including the SLV-X817SG, SLV-X717ME, SLV-X817PS, SLV-X717SG, and SLV-X717PS, represents some of the most advanced video cassette recorders developed during the heyday of VHS technology. These models not only offer robust recording capabilities but also incorporate various features designed to enhance user experience and video quality.

Starting with the SLV-X817SG, this VCR is renowned for its Hi-Fi stereo sound and advanced video processing, delivering clear and vibrant picture quality. It maintains compatibility with both NTSC and PAL formats, making it versatile for different regions. The unit also features a simple front panel layout, allowing for intuitive operation, as well as a host of programmable options for timed recordings.

The SLV-X717ME model targets consumers looking for a feature-rich yet easily operable device. It incorporates functions like a digital auto tracking system, which ensures optimal playback quality by automatically adjusting the tracking to suit various tape conditions. Additionally, the SLV-X717ME supports an extended record mode, allowing users to capture more content on a single tape without sacrificing quality.

The SLV-X817PS introduces additional functionalities including on-screen programming, which simplifies setting up recordings. Users can navigate a user-friendly interface that displays instructions clearly, reducing setup time significantly. Additionally, this model also features a built-in timer, enabling scheduled recordings without needing the VCR to be left on continuously.

For those seeking a blend of performance and convenience, the SLV-X717SG brings forward a comprehensive set of features, highlighting its ability to play and record in extended formats, which provides flexibility when managing video content. It also includes a variety of input and output options, accommodating external devices and enhancing connectivity.

Finally, the SLV-X717PS model connects the dots between accessibility and high-quality playback, focusing on enhancing the user experience with its straightforward design and reliable performance. With features like auto power-off and composite video outputs, it stands as a testament to Sony's commitment to consumer electronics by ensuring effortless use with no compromise on quality.

Together, these models exemplify Sony's innovative approach in the transition period of home entertainment technology and continue to be appreciated for their reliability and performance.
Top Page Image Contents