Step 4
Tuning your TV to the unit
If you have connected your unit to the TV using the audio/video cable, skip this step.
u(On/Standby)
1 | Press u(On/Standby) to turn on the unit. |
8
2 | Turn on your TV and select a programme position for video | |
|
| playback. |
|
| Choose a channel between UHF 30 and 39 on the TV where there is |
|
| no picture and no sound or only a steady rustling sound. |
|
| This channel will now be referred to as the video channel. |
|
| |
| 3 | Insert a tape recorded in the colour system matching your TV into |
|
| the cassette compartment. |
|
| The unit starts playing automatically if you insert a tape with its |
|
| safety tab removed. |
|
| |
| 4 | Press áPLAY on the unit. |
|
| |
5 | Tune the TV until the video playback picture is clearly displayed on | |
|
| the TV screen. |
Refer to your TV manual for tuning instructions.
You have now tuned your TV to the unit. From now on, whenever you want to play a tape, set the TV to the video channel.
If the playback picture does not appear clearly, see “To obtain a clear playback picture” on page 9.
Getting Started