Sony SLV-E780EE manual Troubleshooting, Others Symptom Remedy

Page 46

Troubleshooting (continued)

Others

Symptom	Remedy
A tape cannot be inserted.	• Check that a tape isn’t already in the tape
	compartment.

The remote commander does	• Make sure you are pointing the remote commander at
not function.	the remote sensor on the VCR.
	• Replace all the batteries in the remote commander with
	new ones if they are weak.
	• Make sure the		/		remote control switch is
		TV		VIDEO
	set correctly.
The tracking indicator does not	• The recording condition of the tape is very poor and
appear on the screen.	tracking cannot be adjusted.
	• The tracking mater does not appear when playing back
	an NTSC-recorded tape.

The VCR needs to be cleaned.	• Clean the cabinet, panel and controls with a dry, soft
	cloth, or a soft cloth slightly moistened with a mild
	detergent solution. Do not use any type of solvent,
	such as alcohol or benzine.

Additional Information

Image 46

Contents Video Cassette Recorder Installing PrecautionsSafety Compatible colour systemsTable of contents Unpacking Getting StartedInserting the batteries Setting up the remote commanderUsing the remote commander You can use this remoteSetting up the remote commander TV control buttonsAudio Monitor Connecting the VCR Additional connections To a TV that has a EURO-AV Scart connectorTo a TV that has Line in connector Cable as shown on the rightPress ON/STANDBY to turn on the VCR Tuning your TV to the VCRFactory-preset RF channel appears in the display window Press RF Channel on the VCRPlay a tape, set the TV to the video channel To check to see if the TV tuning is correctYou have now tuned your TV to the VCR. Whenever you want to To obtain a clear picture from the VCRPress Auto SET UP Setting up the VCR with the Auto Set Up functionTo cancel the Auto Set Up function TipSetting the clock Before you start…Press /to start the clock Setting the clockPress /to flash the month and set the month pressing Press OKYou can change the on-screen display language Manual setup Selecting a languagePress /.to select Language and press OK Press /.to select Tuner and press OK Manual setup Presetting channelsProg + Position Press /.to move the cursor Ó toPress Prog +/- to select the programme Press ?//repeatedly until the channel you want is displayedManual setup -- Presetting channels Disabling unwanted programme positionsIf the picture is not clear Press ?//to get a clearer picture, then press OKBasic Operations Playing a tapePlay P Pause # FF p Stop 03 REW To set the colour system Additional tasksTo replay a recently watched scene To play an NTSC-recorded tapeTo use the time counter Playing a tapeTo display the counter on the TV screen, press Display Turn on your TV and set it to the video channel Insert a tape with its safety tab in placeRecording TV programmes To record from a decoder, turn it onRecording TV programmes To stop recordingTo watch another TV programme while recording Safety tabTo check the remaining time To save a recordingTips You can preset up to eight programmes at a time Recording TV programmes using the timerPress Menu and select TIMER, then press OK Recording TV programmes using the timer To stop the VCR while recording, press p Stop on the VCRDaily/weekly recording To use the VCR after setting the timerTo record satellite broadcasts Tips Play Playing/searching at various speedsAdditional Operations Playback options OperationPlaying/searching at various speeds To resume normal playbackPress Quick Timer repeatedly to set to the new duration Recording TV programmes using the quick timerUsing the quick timer during stop mode To extend the durationChecking Changing/ cancelling timer settings When the timer settings overlap How sound is recorded on a video tape Selecting stereo and bilingual programmesSelecting the sound during playback Press Audio Monitor to select the sound you wantAdjusting the tracking Adjusting the pictureAbout Optimum Picture Control OPC Adjusting the picture Changing menu options Press MENU, then select Settings Select OptionsInitial settings are indicated in bold print Menu choicesOptions menu choices Changing menu optionsVideo Options menu choices Menu option Set this option to Menu option Set this option toEditing with another VCR How to connect to record on this VCRVMC-810 audio/video cable not supplied Signal flow This VCR RecorderEditing with another VCR Signal flow Not suppliedOther VCR Player EURO-AV Scart To stop editing Operation When recording on this VCRBefore you start editing Press the p Stop buttons on both VCRsSymptom Remedy TroubleshootingSymptoms caused by contaminated video heads Additional InformationRecording Timer recording Symptom Remedy Troubleshooting Others Symptom RemedySystem SpecificationsSupplied accessories Inputs and outputsFront panel Index to parts and controlsRefer to the pages indicated in parentheses for details Display window VideoRear panel Index to parts and controlsRemote commander Index J, K

Troubleshooting (continued)

Others

Symptom

Remedy

VIDEO