Sony SLV-E580EG manual Precautions, Compatible colour systems, Safety, Installing

Page 2

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Mains lead must only be changed at qualified service shop.

Precautions

Safety

This unit operates on 220 – 240 V AC, 50 Hz. Check that the unit’s operating voltage is identical with your local power supply.

If anything falls into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further.

The unit is not disconnected from the mains as long as it is connected to the mains, even if the unit itself has been turned off.

Unplug the unit from the wall outlet if you do not intend to use it for an extended period of time. To disconnect the cord, pull it out by the plug, never by the cord.

Installing

Allow adequate air circulation to prevent internal heat buildup.

Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation slots.

Do not install the unit near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.

Do not install the unit in an inclined position. It is designed to be operated in a horizontal position only.

Keep the unit and cassettes away from equipment with strong magnets, such as microwave ovens or large loudspeakers.

Do not place heavy objects on the unit.

If the unit is brought directly from a cold to a warm location, moisture may condense inside the VCR and cause damage to the video head and tape. When you first install the unit, or when you move it from a cold to a warm location, wait for about one hour before operating the unit.

Caution

Television programmes, films, video tapes and other materials may be copyrighted. Unauthorized recording of such material may be contrary to the provisions of the copyright laws. Also, use of this recorder with cable television transmission may require authorization from the cable television transmitter and/or programme owner.

Compatible colour systems

This VCR is designed to record using the PAL (B/G or D/K) or MESECAM (B/G or D/K) colour system and play back using the PAL (B/ G or D/K), MESECAM (B/G or D/K), and NTSC 4.43 colour systems. Recording of video sources based on other colour systems cannot be guaranteed.

2

Introduction

Image 2
Contents Video Cassette Recorder Installing PrecautionsSafety Compatible colour systemsTable of contents Unpacking Getting StartedInserting the batteries Setting up the remote commanderUsing the remote commander Remote sensorSetting up the remote commander TV control buttonsControlling other TVs with the remote commander TipCode numbers of controllable TVs Manufacturer Code numberConnecting the VCR Additional connections Connecting the VCRTo a TV that has a EURO-AV Scart connector LINE-1 TV EURO-AV Scart VMC-2121 EURO-AV cable not suppliedTuning your TV to the VCR You have now tuned your TV to the VCR. Whenever you want to Tuning your TV to the VCRTo check to see if the TV tuning is correct Play a tape, set the TV to the video channelAbbreviation Country Language Setting up the VCR with the Auto Set Up functionIf your country does not appear, select Else Press Auto SET UP Setting up the VCR with the Auto Set Up functionTo cancel the Auto Set Up function Before you start… Setting the clockSetting the clock manually Press OK Setting the clockPress Cursor /.to set the date Changing the station for the Auto Clock Set function Press Cursor ?//to select on Manual setup Selecting a language Press Cursor /.to select Language and press OKProg + Manual setup Presetting channelsPress Cursor /.to select Tuner and press OK Position Press Cursor /.to move the cursor Ó to Channel SETPress Prog +/- to select the programme Press Cursor ?//repeatedly until the channel you want isManual setup -- Presetting channels Disabling unwanted programme positionsIf the picture is not clear Press Cursor ?//to get a clearer picture, then press OKManual setup Setting up ShowView Setting up ShowView for satellite broadcasts Manual setup Setting up ShowView Setting Canal Plus channels Setting the Canal Plus decoderConnecting a decoder Press Cursor /.to select OPTIONS, then press OK Setting the Canal Plus decoderSelect Settings and press OK Press MENU, then press Cursor /.toPress Prog +/- to select the desired Programme position12 OK Turn on your TV and set it to the video channel When the tape reaches the end, it will rewind automaticallyPlaying a tape Press á PlayTo replay a recently watched scene Playing a tapeAdditional tasks To set the colour systemTo use the time counter To display the counter on the TV screen, press DisplayTo record from a decoder, turn it on Insert a tape with its safety tab in placeRecording TV programmes REC StopTo stop recording To watch another TV programme while recording Recording TV programmesTo check the remaining time To save a recordingTips Recording TV programmes using ShowView Press ShowviewSET Clear To stop the VCR while recording, press p Stop Recording TV programmes using ShowViewTimer recording with VPS/PDC signals Daily/weekly recordingTo use the VCR after setting the timer To record satellite broadcastsSetting the timer manually Press Menu and select TIMER, then press OKBasic Operations To stop recordingSetting the timer manually REW Playing/searching at various speedsAdditional Operations REW á Play Playback options OperationTo use the shuttle ring in jog mode Using the shuttle ringTo use the shuttle ring in normal mode Playing/searching at various speedsTo resume normal playback Press Quick Timer repeatedly to set to the new duration Recording TV programmes using the quick timerUsing the quick timer during stop mode To extend the durationChecking Changing/ cancelling timer settings Checking/changing/cancelling timer settings When the timer settings overlapTo stop searching Searching using the index functionTo search backwards, press = Index About Optimum Picture Control OPC Adjusting the pictureAdjusting the tracking Tip Changing menu options Press MENU, then select SETTINGS. Select OptionsInitial settings are indicated in bold print Menu choicesMenu option Set this option to Video Options menu choices Menu option Set this option toOptions menu choices Connecting to a VCR How to connect to record on this VCRSignal flow Not supplied Tip Other VCR Player EURO-AV ScartPin adaptor Player not supplied Connecting to a VCRThis VCR Recorder LINE-1 TV Before you start editing When recording on this VCRBasic editing To stop editingTo stop while editing Audio dubbingBefore you start editing… Clock Power Playback Symptom Remedy TroubleshootingSymptoms caused by contaminated video heads Additional InformationTroubleshooting Recording Timer recording Symptom RemedyOthers Symptom Remedy VideoSystem SpecificationsSupplied accessories Inputs and outputsRefer to the pages indicated in parentheses for details Index to parts and controlsFront panel Display window Index to parts and controlsMains lead Antenne Entree connectorRear panel Remote commander Additional Information Additional Information Additional Information Index PAY-TV