Panasonic DMR-ES15EB manual Troubleshooting guide

Page 46

Troubleshooting guide

RQT8320

46

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your dealer for instructions.

The following do not indicate a problem with this unit:

• Regular disc rotating sounds.

 

• Operations do not work due to a poor-quality disc. (Try again using a

• Poor reception due to atmospheric conditions.

Panasonic disc.)

 

• Image disturbance during search.

• The unit freezes due to one of its safety devices being activated.

• Interruptions in reception due to periodic satellite broadcasting breaks.

(Press and hold [8] on the main unit for 10 seconds.)

 

 

 

 

 

 

Power

 

 

Page

 

 

 

 

No power.

 

• Insert the AC mains lead securely into a known active AC mains socket.

8–10

The unit does not turn on

 

• Linked timer recordings with external equipment is in recording standby (“EXT-L” on the unit’s

23

pressing [^ DVD].

 

display blinks when [^ DVD] is pressed). Press [EXT LINK] to cancel the recording standby.

 

The unit switches to the

 

• One of the unit’s safety devices is activated. Press [8] on the main unit to turn the unit on.

standby mode.

 

 

 

 

TV screen and video

 

 

 

 

 

 

 

Television reception

 

• This can occur because the signals are being divided between the unit and other equipment. It can

worsens after connecting

 

be solved by using a signal booster, available from audio-visual suppliers. If it is not solved by

 

the unit.

 

using a signal booster, consult the dealer.

 

Status messages do not

 

• Select “Automatic” in “On-Screen Messages” in the Setup menu.

40

appear.

 

 

 

 

The grey background does

 

• Select “On” in “Grey Background” in the Setup menu.

40

not appear.

 

 

 

 

Picture does not appear

 

• Timer recordings work regardless whether the unit is on or off. To confirm the timer recording is

during timer recording.

 

going to work properly, turn the unit on.

 

The 4:3 aspect ratio picture

 

• Use the television to change the aspect. If your television does not have that function, set

29

expands left and right.

 

“Progressive” in the Picture menu to “Off”.

14

Screen size is wrong.

 

• Check the settings for “TV Aspect” in the Setup menu.

There is a lot of after-image

 

• Set “Playback NR” in the Picture menu to “Off”.

29

when playing video.

 

 

 

 

When playing DVD-Video

 

• Set “Progressive” in the Picture menu to “Off”. This problem is caused by the editing method or

29

using progressive output,

 

material used on DVD-Video, but should be corrected if you use interlace output.

 

one part of the picture

 

 

 

 

momentarily appears to be

 

 

 

 

doubled up.

 

 

 

 

There is no apparent

 

• The effect is less perceivable with some types of video.

change in picture quality

 

 

 

 

when adjusted with the

 

 

 

 

Picture menu in the on-

 

 

 

 

screen menus.

 

 

 

 

The images from this unit

 

• Make sure that the television is connected to the AV1 terminal, VIDEO OUT terminal, S VIDEO

8–11

do not appear on the

 

OUT terminal or COMPONENT VIDEO OUT terminals on this unit.

television.

 

• Make sure that the television’s input setting (e.g., AV1) is correct.

Picture is distorted.

 

• Progressive output is set to on but the connected television is not progressive compatible.

 

 

Press and hold [g] and [q x1.3] on the main unit at the same time for about 5 seconds. The setting

 

 

 

will change to interlace.

 

43

 

 

• The unit’s “TV System” setting differs from the TV system used by the disc now playing. While

 

 

stopped, press and hold [g] and [; OPEN/CLOSE] on the main unit for 5 or more seconds. The

 

 

 

system switches from PAL to NTSC or vice versa.

 

Displays

 

 

 

 

 

 

 

The display is dim.

 

• Change “FL Display” in the Setup menu.

40

“0:00” is flashing on the

 

• Set the clock.

 

41

unit’s display.

 

 

 

 

The clock is not correct.

 

• Under adverse reception conditions, etc., the automatic time correction function may not work. In

41

 

 

this case, “Automatic” is automatically turned to “Off”. If re-setting the Auto Clock Setting does not

 

 

 

work, set the time manually.

 

 

The time recorded on the

 

• Times shown may disagree with actual times.

disc and the available time

 

• Even if you delete recorded content from DVD-R, DVD-R DL, +R or +R DL, there is no increase in

shown do not add up.

 

disc space.

 

 

The play time shown for

 

• Available recording space on a DVD-RW (DVD-Video format) or +RW increases only when the last

MP3 does not agree with

 

recorded title is deleted. It does not increase if other titles are deleted.

 

the actual time.

 

• More disc space than the actual recording time is used after recording or editing DVD-R, DVD-

 

 

R DL, +R or +R DL 200 times or more. (For the second layer on DVD-R DL and +R DL, this

 

 

 

happens after about 60 times.)

 

 

 

• While searching, the elapsed time may not display correctly.

“U88” is displayed and the

 

• The unit is carrying out the recovery process. Do the following to eject the disc.

disc cannot be ejected.

 

1 Press [8] on the main unit to switch the unit to standby.

 

 

 

If the unit doesn’t switch to standby, press and hold [8] on the main unit for about 10 seconds.

 

 

 

The unit is forcibly switched to standby.

 

 

 

2 While the unit is off, press and hold [g] and [CH 1] on the main unit at the same time for about

 

 

 

5 seconds. Remove the disc.

 

 

Sound

 

 

 

 

 

 

 

No sound.

 

• Check the connections and settings. Check the input mode on the amplifier if you have connected

8–11, 40

Low volume.

 

one.

 

24

Distorted sound.

 

• Press [AUDIO] to select the audio.

 

Cannot hear the desired

 

• Turn off V.S.S. in the following cases.

 

29

audio type.

 

– When using discs that do not have surround sound effects such as Karaoke discs.

 

 

 

– When playing bilingual broadcast programmes.

 

 

• The disc may have a restriction on the method of audio output. Some discs prohibit down-mixing

 

 

and this unit can then only output the front two channels. Refer to the disc’s jacket.

 

Cannot switch audio.

 

• You cannot change the audio type when playing DVD-R, DVD-R DL, DVD-RW (DVD-Video format),

 

 

+R, +R DL or +RW. When any these disc types is in use, the audio of broadcast programme

 

 

 

cannot be changed.

 

11, 40

 

 

• When connecting an amplifier using an optical digital cable, you cannot switch the audio if “Dolby

 

 

Digital” is set to “Bitstream”. Set “Dolby Digital” to “PCM” or connect using audio cables.

 

 

• There are discs which audio cannot be changed because of how the disc was created.

Image 46
Contents Region number supported by DVD RecorderExample Before use How to replace the fuseFor United Kingdom and Republic of Ireland EB and EBL area code model onlyTable of contents Safety precautionsDisc handling Included accessoriesUnit care Main unit Remote controlControl reference guide Unit’s display+R DL Disc informationDiscs you can use for recording and play VR DVD Video Recording formatDiscs that cannot be played Remote control informationPlay-only discs Types of disc for the type of connected TVConnection Connecting to a television onlyAV1 Output in the Setup menu Ô Use of the supplied RF coaxial leadsTo view satellite/digital terrestrial programmes AV1 Output and AV2 Input in the Setup menu ÔConnection To record satellite/digital terrestrial programmesTo copy from a VCR Connecting to a television and VCRConnection Refer to Copying from a video cassette recorder ÔConnecting to a stereo amplifier Connecting to an amplifier with a digital input TerminalOther connections TV Tuning Auto Setup Press Video Plus+ Timer recording from satellite receiver with Video Plus+TV Tuning Auto Setup Press e to select the programmeTo enjoy progressive video Set up to match your television and remote controlSelecting television type and aspect Component and press EnterTelevision operation When the following indicator appears on the unit’s displaySet up to match your television and remote control While pressing TV, enter the code with the numbered buttonsRecord continuously Important notes for recordingIt is not possible to From the first layerRecording modes and approximate recording times When finalizing the discWhen opening the tray without disc finalization Disc Insertion/EjectionPress 1 2 CH to select the channel Recording television programmesPress * REC to start recording Playing while you are recording To specify a time to stop recording-One Touch RecordingFlexible Recording Press e,r,w,q to select Start and press EnterTimer icon Timer recordingUsing Video Plus+ system to make timer recordings Press the numbered buttons to enter the Video Plus+ numberRecording standby Timer recordingTo release the programme from Press gMaking timer recordings on the television Check, change or delete a programmeManual Recording To cancel the external controlRecording from a satellite/digital terrestrial receiver To skip unwanted partsInsert a disc Ô Press q Play Playing discsChanging audio during play Press AudioOperations during play Playing discsPress Direct Navigator Using menus to play MP3 and still pictures JPEG/TIFFPlaying MP3 Press e,r to select the trackPicture play Playing still pictures JPEG/TIFFUseful functions during still Press e,r,w,q to select the still picture and press EnterPress Display Using on-screen menus/FUNCTIONS window and Status messageUsing on-screen menus Enter Return Display StatusStatus message Functions windowPress Status Press Direct Navigator Press e,r,w,q to select the title Editing titles/chaptersEditing titles/chapters and playing chapters Press e,r,w,q to select the chapterTitle operations Chapter operationsPress w,q to select the source title and press r Creating, editing and playing playlistsCreating playlists Press w,q to select the position toEditing and playing playlists/ chapters Playlist operationsDV automatic recording DV Auto Rec Copying from a video cassette recorderStart play on the other equipment Deleting titles during play Using Delete Navigator to delete titlesDeleting titles Press Functions Press e,r to select Delete Press EnterDVD Management Press e,r to select Create Top Enabling discs to be played on other equipment FinalizeCreating Top Menu Create Top Menu Menu and press EnterPress q Play Linked operations with the TV Q LinkChild Lock Video Plus+Unit’s settings Changing the unit’s settingsSummary of settings Press e,r to select the tabChanging the unit’s settings DTS MpegChanging the unit’s settings/Set the clock manually Press e,r to change the settingPress Enter when you have finished the settings Set the clock manuallyResetting channel setting Press e,r to select the TV system Press e,r to select ConnectionPress e,r to select TV System Show Enter Name screenOn the television MessagesOn the unit’s display Frequently asked questions Troubleshooting guide Troubleshooting guide Troubleshooting guide Troubleshooting guide/Glossary GlossaryLanguage code list SpecificationsQuechua 8185 Tajik 8471 Zulu 9085 If you see this symbol SpecificationsFor business users in the European Union Index