Panasonic DMR-ES18 To cancel recording when recording has already begun, Press g

Page 19
Press [PROG/CHECK].

To cancel recording when recording has already begun

1 When this unit is on

Press [g].

The confirmation screen appears.

2 Press [w , q] to select “Stop Recording” and press [OK].

Recording stops and the timer recording is cancelled. (Daily and weekly timers remain and timer recording will start as programmed.)

To release the programme from recording standby

Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].

1

2 Press [e , r] to select the programme and press the “Red” button.

The timer icon (Ô 18, right) disappears.

•To put the programme on recording standby again Perform step 2 again before the programme start time to put the programme on recording standby. Timer recording will work only if the timer icon is displayed.

Notes on timer recording

•When an inserted disc has been recorded with the signal system different from the one set in the default TV system (Ô 39), this unit does not enter the timer recording standby and the timer recording will not start.

•Timer recordings are activated regardless of whether the unit is turned on/off.

•“z” flashes on the unit’s display for about 5 seconds when the unit cannot go to timer recording standby (e.g., a recordable disc is not in the disc tray).

•Timer recordings begin when the set time is reached even when recording or when playing.

•If the unit is turned on when timer recording begins, it remains turned on after recording finishes. It does not turn off automatically. You can turn the unit off during timer recording.

•If the unit is not put in the timer recording standby mode at the last 10 minutes before the programmed timer recording starting time, “z” flashes on the unit’s display. In this case, insert a recordable disc to put the unit in the timer recording standby mode.

•If you are making consecutive recordings that will start one after the other, the beginning of the later programme cannot be recorded.

e.g., Programme1 10:00–11:00 Programme2 11:00–12:00

 

11:00

Programme1 Programme2

Recorded

Recorded

Not recorded

•If the actual broadcasting times of timer recordings overlap, the recording that starts first always has priority, and the recording of the later programme will start only after the first timer recording has finished.

Check, change or delete a programme

Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].

Press [PROG/CHECK].

Icons

 

 

 

Timer recording standby is activated.

recording

 

 

 

This programme is currently recording.

 

 

 

The times overlap those in another

 

 

 

 

 

programme. Recording of the programme

 

 

 

with the later start time starts when the

 

 

 

earlier programme finishes recording.

Timer

 

 

You stopped a weekly or daily timer

 

 

 

 

 

recording. The icon disappears the next

 

 

 

time the timer programme starts recording.

 

The disc was full so the programme failed to record.

The programme was copy-protected so it was not recorded.

XThe programme did not complete recording because the disc is dirty or some other reason.

Timer

 

 

 

Remain

1:57 SP

Recording

 

 

SAT 05.07.08 10:20:42

No.

Name

Date

Start

Stop

Mode

Drive

space

01

ARD

5. 7. SAT

19:00

20:00

SP

OK

 

 

New Timer Programme

 

 

Press OK to store new programme.

 

 

 

OK

 

 

 

 

 

 

RETURN

 

 

 

 

 

Message displayed in the “Drive space” line

OK: Displayed if the recording can fit in the remaining space.

→(Date): For recordings made daily or weekly, the display will show until when recordings can be made (up to a maximum of one month from the present time) based on the time remaining on the disc.

!: It may not be possible to record because:

•no disc is inserted

•the disc is write-protected

•there is no more space left

•the number of possible titles has reached its maximum.

•the inserted disc has been recorded with the signal system different from the signal system of TV system signal set on this unit.

nTo change a programme

Press [e , r] to select the programme and press [OK] (Ô 18, step 3).

nTo delete a programme

Press [e , r] to select the programme and press [DELETE ]. You can also delete a programme with the following steps

1Press [e , r] to select the programme and press [OPTION].

2Press [e , r] to select “Delete” and press [OK].

nTo exit the timer recording list

Press [PROG/CHECK].

•Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.

RQT9053

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Example Operating InstructionsThis Unit is Intended for USE in Tropical Climates How to replace the fuseFor Middle East and South Africa Before useTable of contents Use Included accessoriesRemote control information BatteriesUnit care Disc handlingDVD Video Recording format RAM Disc informationDiscs you can use for recording and play Recording formatDisc information Play-only discsDiscs that cannot be played Types of disc for the type of connected TVBq Channel select Ô Remote controlControl reference guide Bm Start recording ÔControl Main unitUnit’s display Reference guideConnection Connecting a televisionOther connections Ô Connection Connecting a television and VCRConnection Connecting an amplifier with a digital input TerminalConnecting a stereo amplifier Other connectionsReturn Channel reception and TV aspect settingsConnection/ Channel reception and TV aspect settings Press e, r to select the TV aspect and press OKProgramme When recording aImportant notes for recording BilingualDisc Insertion/Ejection When finalising the discWhen opening the tray without disc finalisation RQT9053 Recording modes and approximate recording timesPress 1 2 CH to select the channel Recording television programmesPress * REC to start recording Flexible Recording To specify a time to stop recording -One Touch RecordingPlaying while you are recording Manually programming timer recordings Timer recordingTo release the programme from recording standby To cancel recording when recording has already begunPress g Press w , q to select Stop Recording and press OKPress Audio Playing discsInsert a disc Ô Press q Play Changing audio during playPlaying discs Operations during playPlaying DivX, MP3 and still pictures Jpeg Playing DivX video contentsShowing the menu screen Playing still pictures Playing MP3 filesZoom out Useful functions during still picture playRotate ZoomMP3 Regarding DivX VOD contentRegarding MP3, DivX and still pictures Display the unit’s registration codePress e, r to select the menu Using on-screen menus/Status messageUsing on-screen menus Press DisplayPress Status Status messageScreen Function Menu window Function Menu window/Entering textEntering text Deleting titles Using the Delete Navigator to deleteDeleting titles during play Select the operation and press OK Editing titles/chaptersPress e, r, w, q to select the chapter Press OPTION, then press e, r toEnter Name Title operationsDelete PropertiesPress Function Menu Press e, r to select To Others Press OK Creating, editing and playing playlistsPress w, q to select the source title and press r Creating playlistsPlaylist operations Editing and playing playlists/chaptersStart play on the other equipment Copying from a video cassette recorderDV automatic recording DV Auto Rec Manual recordingProviding a name for a disc Common proceduresSetting the protection DVD ManagementDVD Management Enabling discs to be played on other equipment FinaliseCreating Top Menu Create Top Menu Press e, r to select Create Top 5 Menu and press OKPress e, r to select the tab Changing the unit’s settingsTuning Manual TuningSound Changing the unit’s settingsDisc PictureConnection DisplayOthers When the following indicator appears on the unit’s displayTelevision operation Other SettingsChild Lock Safety precautions On the television MessagesMessages On the unit’s display Set up Frequently asked questionsAsked Troubleshooting guide Troubleshooting guide Troubleshooting guide Guide RGB GlossaryGlossary/Specifications SpecificationsIndex If you see this symbol
Top Page Image Contents