Sony KDL52V4100 operating instructions Wide Mode changes automatically, Adjust Pitch and Phase

Page 44

No color/Dark picture/Color is not correct / The picture is too bright

Noisy picture

Blurry picture / Poor color

No sound / Noisy sound

No sound / Good picture

Audio noise

No Audio or Low Audio with Home Theater System

BRAVIA Sync

Cannot find connected BRAVIA Sync HDMI device

Second A/V receiver is not listed on the Device List

PC Input

No picture / No signal

Poor Picture

General

Wide Mode changes automatically

Suddenly the picture gets smaller

•Press PICTURE to select the desired Picture Mode (see page 21).

•Adjust the Picture Mode options in the Picture settings (see page 32).

•If you set the Power Saving mode to Low or High, it will enhance the black level (see page 42).

•Make sure that the antenna is connected using a 75-ohm coaxial cable.

•Keep the antenna cable away from other connecting cords.

•To avoid TV interference, make sure to use an undamaged antenna cable.

•Transporting the TV from a cold to a warm location or a sudden change in room temperature may cause moisture condensation, resulting in a blurry picture or poor color. Turn off your TV and wait a few hours before powering on again.

•Check the volume control.

•Press MUTING or VOL + so that "Muting" disappears from the screen (page 20).

•Set Speakers to TV Speakers in the Sound settings (see page 34). If it is set to Audio System, sound is not output from the TV's speakers regardless of the TV's volume control.

•When using HDMI input with Super Audio CD or DVD-Audio, DIGITAL OUT (Optical) may not provide an audio signal.

•When tuned to a digital channel with Alternate Audio, the broadcaster may

not be broadcasting your preferred Alternate Audio language. Press OPTIONS, highlight and select Alternate Audio, and change the Alternate

Audio language (see page 35).

•Make sure that the antenna is connected using a 75-ohm coaxial cable.

•Keep the antenna cable away from other connecting cords.

•To avoid TV interference, make sure to use an undamaged antenna cable.

•Press THEATER for BRAVIA Sync activated Theater System (see page 25).

•Set Speakers to Audio System in the Sound settings (see page 34).

•Set Audio Out to Fixed in the Sound settings (see page 35).

•Make sure that the Control for HDMI is set up on both the TV and the optional device compatible with BRAVIA Sync (see page 25).

•Only one A/V receiver may be used with the BRAVIA Sync and Control for HDMI functions at one time (see page 41 ).

•Confirm the PC is correctly connected to the TV with either the PC IN (with an HDI5 cable) or with the HDMI IN.

•Ensure the output signal from the PC is one of the formats listed on page 14.

•Turn the PC off. Confirm the PC connection and restart the PC. Plug-and-play will auto-detect the TV and correctly set up PC timing.

•Verity PC Power Management is activated (see page 42).

•Verify the PC is not in standby or hibernation mode.

•Adjust the resolution (see page 14).

•Adjust Pitch and Phase.

•The current Wide Mode setting is automatically replaced with the 4:3 Default setting when you change the channel or video input, if 4:3 Default in

the Screen settings is set to other than Off. If you want to lock in Wide Mode selected with WIDE on the remote control, set 4:3 Default to Off in the

Screen settings (see page 35).

•Check the Auto Wide option in the Screen settings (see page 35).

•The picture gets smaller during the commercials due to the method in which the provider broadcasts their content. When HD content channels switch to SD content (commercials), the picture may be small with a black border.

•Auto Wide will not expand the picture during these content changes since the content information is regulated by the channel signal provider. You can manually change the Wide Mode if you prefer (see page 22). This setting will remain in effect until you change the channel or input or manually change the Wide Mode again.

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Operating Instructions Owners Record Declaration of ConformityLicensing Information For Customers in CanadaTV Home Menu XMBT. XrossMediaBar Installing SpecificationsFour Steps to a Full HD Experience Set, Sound Picture Quality AspectTo learn more about HDTV, visit TV Home Menu Xmbtm XrossMediaBar Category Bar Category Object BarInstalling the TV RequiredetachingtheTable-Topstand Consider the following for best picture quality Installed with standInstalled on the wall Prevent the TV from Toppling Over Secure Tile TV to a wail and/or StandUse a Sony TV Stand Recommended Measures to Secure the TVLocating Inputs and Outputs AUDiODMeX Hdmi in 1/2/3Cable or VHF/UHF or VHF only Connecting the TVShown with Hdmi Connection Shown with DVI Connection Shown with Component ConnectionPC Input Signal Reference Chart Display Area to Full PixelDVD Setting Up the Channel List Initial Setup Initial SetupBegin your TV Guide On Screen Setup ButtonDescribed on page 37. Useful for antenna To Run Initial Setup Again or Auto Program at a Later TimeProgram, see Inserting Batteries into the Remote Control When Using the Remote ControlTV Controls Follow the guidelines below5, Play and CH+ Remote Control Button DescriptionOff, 15 min, 30 min, 45 min, 60 min, 90 min or Return Home DMeVivid, Photo-Standard, Photo-Original, Photo Motion EnhancerScreen Timing Indicators SpeakerLight SensorFavorites Using Bravia Sync with Control for Hdmi Available options using Control for HdmiBackground TV To connect Sony equipment with Control for HdmiHow to Use TV Guide On Screen Use your TVs remote control to navigate the Guide systemINiiii!ii!iiiiIi NumericallyUsing P&P and PIP Features Press OptionsAdjusting TV Settings Media Category IconsInputs from NavigatingThrough TV Home Menu on XMBT= TV Settings Descriptions Current Time Timer Sleep TimerPicture Mode Vivid CustomPhoto-Custom PictureMotion Enhancer Stereo mode StereoSpeakers TV Speakers Auto SAPWide Mode Auto Wide Default Wide Mode optionAudio Out Fixed MutingTo Full Vertical SizeSignal Type Auto Program Add Digital Channels Show/Hide ChannelsEdit Channel Labels Select Auto ProgramPassword Change PasswordCCl CC2 To View Blocked ProgramsRatingOff Child Youth Young Adult Custom Channel BlockCustom Rating System Chart For Country selection of U.S.AFor Country selection of Canada A. Rating See TV Rating underManage Inputs Control for Hdmi On/OffFor Hdmi function Control for Hdmi is OnInitial Setup when Adjustments Sound Adjustments, Parental LockInitial Setup. If Please seeTroubleshooting Check PC Power Management in General Setup settings seeSony TV, please Visit our website Or call one Following numbersWide Mode changes automatically Adjust Pitch and PhaseWide Mode again Parental Lock settingSpecifications SystemLanguage42 Troubleshooting43-45Index Please contact Sony directly if you Contact Sony Customer Support atPlease Do Not Return the Product to the Store Or to speak with a support representative

KDL52V4100 specifications

The Sony KDL-52V4100 is a notable model in the realm of flat-screen televisions, boasting an impressive array of features and technologies that cater to the discerning viewer. Released as part of Sony's BRAVIA series, the KDL-52V4100 exemplifies the brand's commitment to delivering high-quality visual experiences.

One of the standout features of the KDL-52V4100 is its remarkable 52-inch screen, providing ample display space for an immersive viewing experience. With a native resolution of 1920 x 1080 pixels, the television supports Full HD content, ensuring sharp images and vibrant colors. The panel employs Sony's advanced BRAVIA Engine technology, which enhances video quality by reducing noise and improving color accuracy, resulting in a clearer and more lifelike picture.

In terms of connectivity, the KDL-52V4100 is equipped with multiple HDMI inputs, allowing users to connect various high-definition devices, such as Blu-ray players, gaming consoles, and set-top boxes. Additionally, it features component and composite inputs, ensuring compatibility with older devices. The inclusion of USB ports also enables users to view photos and videos directly from USB storage devices, adding to the TV's versatility.

Audio quality is another key aspect of the KDL-52V4100. It features built-in speakers that deliver a commendable sound experience, complemented by S-Force Front Surround technology, which creates an immersive audio environment, enhancing movie nights and gaming sessions alike.

The television also supports various display settings, including multiple picture modes, allowing viewers to customize their experience according to their preferences or the type of content being viewed. Energy-saving features, such as the ambient light sensor, automatically adjust the screen brightness based on the surrounding light conditions, promoting energy efficiency.

Overall, the Sony KDL-52V4100 stands out as a well-rounded television that combines sleek design with cutting-edge technology. Its Full HD resolution, advanced video processing, and versatile connectivity options make it a solid choice for anyone looking to elevate their home entertainment setup. With its impressive features and reliable performance, the KDL-52V4100 has earned its place in the competitive market of flat-screen TVs.
Top Page Image Contents