Sony FWD-42PV manual Dtv

Code Table(1-a) continued

	[a]Function		[b]Range/Switch Code		Command
				Control	Enquiry	Standby	Power On
0x10	Index Number	0x01-0xFF		Yes	Yes	Disable	Enable
0x13	Power Saving	0x00	Standard	Yes	Yes	Disable	Enable
		0x01	Reduce
0x14	Speaker Out	0x00	ON	Yes	Yes	Disable	Enable
		0x01	OFF
0x16	HD Mode	0x00	1080i	Yes	Yes	Disable	Enable
		0x01	1035i
0x17	RGB Mode	0x00	DTV	Yes	Yes	Disable	Enable
		0x01	PC
0x18	Sync Mode	0x00	H/Comp	Yes	Yes	Disable	Enable
		0x01	Video
0x1B	Clock Display	0x00	OFF	Yes	Yes	Disable	Enable
		0x01	ON
0x40	All White	0x00	OFF	Yes	Yes	Disable	Enable
		0x01	ON
0x41	BackGroud	0x00	Gray	Yes	Yes	Disable	Enable
		0x01	Dark Gray
		0x02	Black
0x42	Auto Dimmer	0x00	OFF	Yes	Yes	Disable	Enable
		0x01	ON
0x60	Digital Port	0x00	Port 1	Yes	Yes	Enable	Enable
		0x01	Port 2
0x65	IP Setting Mode	0x00	DHCP	Yes	Yes	Enable	Enable
		0x01	Manual
		0X02	Speed
0x66	IP Setting Execute	0x00	No	No	Yes	Enable	Enable
		0x01	Yes
0x67	IP Setting Result	0x00	Done
		0x01	Error 1 (UART Commu.)
		0x02	Error 2 (Duplication)
		0x03	Error 3 (IP Add Setting)	Yes	No	Enable	Enable
		0x04	Error 4 (GW Add setting)
		0x05	Error 5 (DNS1 Setting)
		0x06	Error 6 (DNS2 Setting)
		0x07	Error 7 (Sbnt Msk Setting)
0x68	Speed Setting	0x00	100Mbps/Full Duplex
		0x01	100Mbps/Half Duplex	Yes	Yes	Enable	Enable
		0x02	10Mbps/Full Duplex
		0x03	10Mbps/Half Duplex
		0x04	Auto

*1: After sending the Power On/Off command, wait for 10 sec. before sending a new command. Otherwise the display may no receive the command correctly.

*2: Because of the option slots' spec difference between 42LX1 and 42PV1 and their relation with the BKM-FW32, Option2 command of LX1 is assigned as Option1 command of 42PV1