Sony FDL-PT22 Section Disassembly, Cabinet Removal, 2Channel button 1Screw Hooks +P2 x

Page 6

SECTION 2

DISASSEMBLY

2-1. CABINET REMOVAL

1.Remove battery cover 8.

2.Push the two hooks in the lower section of the rear cabinet with

a pint and the like to undo them.

2Channel button

1Screw

Hooks

(+P2 x 10)

3. While pressing the rear cabinet, undo hooks on the periphery.

4. Insert a pin into the upper side of the cabinet, and while push- ing the hook, tilt the pin to the rear cabinet side.

5.Remove the channel button 2.

6. Remove the speaker cord from the connector.

7. Remove B board 3 and A board 4.

8. Remove one screw 6 (+P x 10) from T board 5.

9. Remove T board 5 from the hooks (one each on both side) on the rear cabinet.

Front cabinet

Rear cabinet

1Front cabinet assy

3B board

4A board

5T board

Claw

7Rear cabinet assy

8Battery cover

– 6 –

Image 6
Contents LCD Color TV Specifications Disassembly Table of ContentsDiagrams Circuit AdjustmentsPower Sources see fig. a GeneralExternal Antenna Connection see fig. C Section Disassembly Cabinet Removal2Channel button 1Screw Hooks +P2 x Service Position CN602 Board Service cord CN201 AntenaSection Circuit Adjustment Board AdjustmentAFT Adjustment RF.AGC AdjustmentChannel Display Position Adjustment HUE Adjustment Gradation AdjustmentSection Diagrams Block DiagramBoard IC Voltage List Printed Wiring Boards and Schematic DiagramsCircuit Boards Location Board TransistorDiode BoardBoard IC001 AN5707NFAP TransistorAudio AMP Variable Resistor Board Transistor Voltage ListChroma LCD CHROMA,LCD Interface Chassis Section Exploded ViewsSemiconductors 685-104-19 +P2Electrical Parts List SectionREF. no Description Resistor Block FDL-PT22