Sylvania LC225SC9 5PC Settings, Horizontal Position, Vertical Position, Auto Adjustment

5PC Settings

This function lets you adjust the PC screen position, clock and phase during PC input.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “DETAIL”, then press [ENTER].

or

3Use [Cursor K/L] to select “PC settings”, then press [ENTER].

or	Detailil
	Closed Caption
	V–chip

PC Settings

HDMI1 Audio Auto

4Use [Cursor K/L] to select the setting you want to adjust, then press [ENTER].

or	PC Settingsi
	Auto Adjustment
	Horizontal Position	0
	Vertical Position	0
	Clock	0
	Phase	0

							INTRODUCTION
Use [Cursor K/L] to select “Adjust”, then press							PREPARATION
5 Adjust the setting.
Auto Adjustment
[ENTER].
				Auto Adjustmentj			INITIALSETTING
		or		This function automatically		Cancel
				adjusts the position, clock and		Adjust
				phase of the picture element.
• The horizontal / vertical position, clock and phase of							WATCHING
the PC screen are automatically adjusted.
Horizontal Position, Vertical Position							TV
Use [Cursor s/B] to adjust.
				Cursor s	Cursor B
Horizontal Position				to move PC	to move PC		OPTIONAL
H. Position	0	-
				+	screen right
Adjust		Move	ENTER Enter	screen left
							SETTING
V. Position	0	-		+to move PC	to move PC
Vertical Position
Adjust		Move	ENTER Enter	screen down	screen up
							TROUBLESHOOTING
Clock, Phase
Use [Cursor {/B] to adjust the “Clock” setting to
stabilize the PC screen and the “Phase” setting to
improve the clarity of the PC screen.
				Cursor s	Cursor B
Clock
Clock	0						INFORMATION
Phase	0	Move	ENTER Enter
Adjust				to decrease	to increase
Phase				setting value	setting value
Adjust		Move	ENTER Enter

6Press [SETUP] to exit.

Note:

•Adjust the “Phase” setting after the “Clock” setting has been properly adjusted.

•You may not obtain an appropriate screen with auto adjustment for some signals. In this case, adjust the settings manually.

•The limit value of the horizontal / vertical position differs depending on PC input signal.

31

EN