2Preparation
This section explains how to set up your Plaza HDR•S to receive Freesat channels.
THE SATELLITE DISH
CONNECTING YOUR RECEIVER
Place your Plaza HDR•S receiver on a firm, level surface close to the television, a mains electricity socket, and the cables from the dish. (See Appendix A – Safety.)
To receive Freesat, you must connect your Plaza HDR•S receiver to an appropriate satellite dish, fixed in position and accurately pointed at the 28.2° East satellite position.
For safety reasons and to provide reliable reception, we strongly recommend that you have your dish installed by a professional. You may be able to use a satellite dish already installed at your home. If you have any questions about the dish, please consult your installer.
10
LNB IN 1 | LNB IN 2 |
|
|
|
| OPTICAL |
300mA max | 300mA max |
|
|
|
|
|
|
|
|
|
| R | L |
|
|
|
|
| AUDIO | S/PDIF |
|
|
|
|
|
| RISK OF ELECTRIC SHOCK |
|
|
|
|
|
| DO NOT OPEN |
TV SCART | VCR SCART | ETHERNET | USB | HDMI | 3A |
|
DC 13V |
|
Connect the two cables (or one double cable) from your dish to the LNB IN 1 and LNB IN 2 sockets at the back of the receiver (if the dish cables are fitted with a wall socket inside your home, you will need connecting cables, which you can get from your installer). It does not matter which of the two cables from the dish is connected to which LNB IN socket.