Editing Channel Pids

Sat/TP Edit ---

Satellite

Configuration

Add: Press green key to display keyboard. Select and press OK on letters to name the satellite and press EXIT. Name is added at end of satellite list. Enter position with 0~9, PAGE up / down keys.

Delete: Scroll to required satellite and press red key.

Sort: Press blue key to sort the list by position.

Rename: Press yellow key to display keyboard. Select and press OK on the letters to rename.

Sat/TP Edit ---

Configuration

Add: Press green key to display keyboard. Name the TP and press EXIT. Name is added at end of TP list and focus moves to TP Data. Enter data and press EXIT.

Delete: Scroll to required TP and press red key.

Sort: Press blue key to sort the list by frequency.

Rename: Press yellow key to display keyboard. Select and press OK on the letters to rename.

Edit: Scroll to required TP and press white key. Focus will move to TP Data for editing.

Press MENU key and go to EDIT. Select PID Edit

PID Edit	Configuration
	Scroll to required channel and press OK. Focus will
	move to PID Data. Enter new PID with 0~9 keys.
	After configuration press EXIT and save the
	settings.

TO SET PARENTAL LOCK

Press MENU, select Parental Lock and enter your password. Default password is ‘0000’.

Parental Lock

Configuration

Lock: Press left / right and select ‘On’.

STB Lock: To lock the full operation of the STB select ‘On’

Old Password: With 0~9 keys enter your password. Default is ‘0000’.

New Password: With 0~9 keys enter your new password when you wish to change it.

Confirm: With 0~9 keys enter your new password again.

Note: After ‘Lock’ is turned ‘On’, channels locked in edit menu will require a password to open. If STB lock is on, a password is required to operate any function. After applying new password, the default password is no longer operative. If you loose or forget your password, apply the master password given on page 16.

TO RESET YOUR STB

Press MENU, select Master Reset and enter your password. Default password is ‘0000’.

Master Reset	Configuration
	Factory Reset: Press OK to erase all settings.
	Erase Radio Channels: Press OK to erase radio
	channels only.
	Erase Scrambled Channels: Press OK to erase
	scrambled channels only.
	Erase All Channels: Press OK to erase all
	channels but keep other user settings.

TO UPGRADE SOFTWARE OR TRANSFER DATA

Press MENU, go to INSTALL, select Data Download and enter your password. Default password is ‘0000’.

Data Download

Configuration

STB To PC Download: Press OK to transfer user settings to PC for using with PC Edit software.

STB To STB Download: Press OK to transfer user settings to another STB of same model.

System Information: Press OK to display software version. Press EXIT to close.

OTA Upgrade: To upgrade software via satellite. Press OK to open upgrade menu. Menu is pre- configured therefore press blue key to start.

Note: To upgrade software via satellite, your dish must be positioned to HotBird 1-6 (13.0E). This satellite provides the OTA Upgrade. The STB will check for any available upgrade and start download. If the software in STB is same as in OTA Upgrade, it will display ’Latest Software Already Installed’. After upgrading software, it may be necessary to Master Reset the STB.

STB TO STB COPY FUNCTION

1.Connect download cable to ‘RS232’ connectors (C12) on both STB.

2.Connect power to master STB and switch it on. Go to INSTALL menu and select Data Download and enter your password. Select STB to STB Download and press OK. Select option and press OK. ‘Downloading’ message will appear.

3.Connect power to slave STB. After initialising it will start download.

4.When finished, the slave STB will re-initialise.

TO UPGRADE SOFTWARE VIA PC

Connect NUL MODEM cable (see below) to RS232 connector C12. The software is available on our website http://www.plaza-xt.com Follow instructions contained within the zipped file.