CHANNEL SETTINGS
AUTOSCAN
With AUTOSCAN, your TV automatically scans and memorizes your area’s viewable channels. Activate AUTOSCAN when you turn on your TV for the first time, change broadcast sources (e.g. from antenna to CATV), or move your TV to a different broadcast area.
|
| STILL |
- | 0 |
|
SETUP |
| SCREEN |
| MODE | |
| ENTER |
|
BACK |
| INFO |
| CH RETURN |
|
VOL. | MUTE | CH |
NOTE:
•Make sure the TV is connected to antenna or cable.
1Display the setup screen.
•Press [SETUP].
The following setup screen appears.
3For TV channels, using [K/L], select “Air”. For CATV channels, select “Cable”.
Autoscan |
|
|
Autoscan will rescan all channels. | Back | |
This may take a while to complete. | Air | |
|
| |
Select the destination of "ANT IN" jack. | Cable | |
|
| |
Air |
| Cable |
| 1hour | |
Cable | Or |
|
| ANT IN |
|
•Press [ENTER].
Scanning and memorizing the channels auto- matically starts.
Now the system is scanning for channels, please wait.
72%
Analog channels | 10ch |
Digital channels | 6ch |
SETUP | Exit |
|
•When the scanning and memorizing are com- pleted, the lowest memorized channel in the broadcasting will be displayed.
NOTES:
•If you connect a cable system directly, contact the CATV installer.
•If you press [POWER] or [SETUP] during Autoscan, this setting will be canceled.
•If there is no reception connected or a poor signal is detect- ed, a Hint will appear on screen once scanning stops.
INITIAL SETTINGS / CHANNEL SETTINGS
2Select “CHANNEL” and press [ENTER] to con- firm.
• Using [K/L], select “Autoscan”.
Channell
Autoscan
Channel List
Manual Register
Antenna
•Press [ENTER].
13
EN