Sylvania 6719DB1 owner manual Hints for Automatic Timer Recording, Auto Return, Sleep Timer

Page 34

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the REC indicator goes off.

2)Press the SETUP button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the Arrow B button. The details of programs

appear on the TV screen.

5)Press the SETUP button on the remote control to return to TV mode.

HINTS FOR AUTOMATIC

TIMER RECORDING

Make sure the channel you want to record is prop- erly set in advance.

It is not necessary to press the RECORD button for timer recording.

Recording begins automatically at the Start time.

If you are recording using a Timer mode, you may not operate the unit manually.

The erase-prevention tab on the cassette must be in place (or you must put tape over the hole).

If the erase-prevention tab is removed, the cassette will be ejected when the POWER button is pressed to off.

If the tape runs out before the end time, the TV/DVD/VHS will switch to the Stop mode imme- diately, and the tape will be ejected.

AUTO RETURN

With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically.

3Auto Return will begin

When all the timer recordings are completed, the TV/DVD/VHS will rewind to the beginning of the recorded program(s).

NOTE:

If you press the POWER button while tape is rewinding, the Auto Return will stop.

4Watch the recorded program

Press the PLAY button.

TO CANCEL THE AUTO RETURN MODE

Repeat steps [1] and [2], select [OFF] using the Arrow B or s button.

If there is a power failure of any kind, the unit will retain its memory for this feature.

SLEEP TIMER

The Sleep Timer function turns off the TV/DVD/VHS without using the POWER button after a desired period of time.

NOTE:

This function does not operate during Recording mode.

1Select “SLEEP TIMER”

Press the SLEEP button on the remote control until “SLEEP TIMER” appears.

2Set sleep time

1Select “USER’S SET UP”

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to “USER’S SET UP”. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP

BUSER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

Press the SLEEP button until your desired sleep time appears.

Each additional push will increase the time by 30 minutes up to 120 minutes.

SLEEP 120 MINUTES

After 5 seconds, exit the Sleep

Timer setting.

2Set “AUTO RETURN” to [ON]

Press the Arrow K or L button to

– USER’S SET UP –

point to “AUTO RETURN”.

RENTAL

[OFF]

Press the Arrow B or s button

REPEAT PLAY

[OFF]

B AUTO RETURN

[ON]

until [ON] appears.

VCR AUDIO

[HIFI]

TV AUDIO

[STEREO]

TO CANCEL THE SLEEP TIMER

Press the SLEEP button on the remote control until “SLEEP TIMER” appears. Press the SLEEP button until “SLEEP 0 MINUTES” appears.

- 34 -

EN

1C29

Image 34
Contents Supplied Accessories 6719DB1Important Safeguards S2 8 9 8 a Important Copyright Information PrecautionsLaser Safety RADIO-TV InterferenceLocationwarning Avoid the Hazards Electrical Shock and FireTable of Contents Features TV/VCRDVD Press to insert discs into or remove them from Operating Controls and FunctionsTray Resets a setting Press to adjust the picturePress to enter or exit the TV menu or DVD setup mode Activates program playback or random playback modeVHF/UHF Separate Antennas Preparation for USEANTENNA/CABLE Connection Cable Without CONVERTER/ Descrambler BOXExternal Input Mode Connecting to External Input JacksInstalling the Batteries To Record a SCRAMBLED/UNSCRAM- Bled ChannelConnecting to a Dolby Digital Decoder DTS DECODER, or Mpeg Decoder for DVDConnecting to a Stereo System for DVD Channel SET UP for First Time SET UP for USEDeleting or Adding Channel DAYLIGHT-SAVING Time Channel SET UP AgainTo Cancel the DAYLIGHT-SAVING Time Selecting the LanguageClock SET UP Auto / Manual Auto Clock SettingTo Change Clock Setting Manual Clock SettingPlease Note Degaussing TV OperationWatching a TV Program Picture ControlWhen the Closed Caption Mode is on To Cancel the Closed Caption SystemClosed Caption System When you select TV-Y7 Chip SET UPTV Rating SET UP When you select TV-PG, TV-14 or TV-MAMpaa Rating SET UP Change Access CodeSTEREO/SAP Checking the Selected MTS ModeMTS RECORDING/MONITOR Mode SelectionSelecting the MTS System To Select Hifi Mode To Select Mono ModeTo Select STEREO, SAP, or Mono Video Cassette Playback Special Playback To Cancel the Rental ModeTo Cancel the Repeat Play Mode Rental PlaybackZero Return TV/DVD/VHS power must be turned on Insert a tapeSearch Time SearchReal Time Tape Counter Special FeaturesIndex Search Auto REWIND-EJECTNormal Recording RecordingSkipping Unwanted Scenes During Recording 030 Minutes Pushes Display Recording lengthPush Normal recording 100 Minutes Pushes 800Timer Automatic Timer RecordingTo Cancel AN Automatic Timer Recording Timer Program ExtensionTo Correct a Program Sleep Timer Hints for Automatic Timer RecordingAuto Return On Screen Display OFF mode Counter mode Clock mode Clock/Counter modeCable Channel Designations Following discs can be played back on this DVD player Playable DiscsDisc Types DVDPlaying a DVD Video Or AN Audio CD Using the DVD MenusUsing the Title Menu Calling UP a Menu Screen During PlaybackFast FORWARD/REVERSE Pausing Playback or Displaying a Still PictureStepping Through Frames ¡Playback will pause, with soundStarting from a Desired Track Starting from a Desired Time CountPlaying from a Desired Title or Chapter Tricks with the Skip Buttons H, G¡The starting point a will then be Repeat Selected RepeatYou can define a section to be played back repeatedly ¡The selected section Will be Repeat Played back repeatedlyZoom Playback Settings Changing the Audio Language or Sound ModeChanging the Subtitle Language Changing the Camera Angle Multi-Angle PicturesPlayback Setup Window CD Changing the ON-SCREEN DisplayLanguage Settings ¡The setup screen appearsDisplay Settings ¡The setup screen will appearAudio Settings ¡The setup screen will appearParental Lock If YOU Forget the PasswordControl Levels Language Code List Problem Corrective Action Troubleshooting GuideAdjust picture controls Closed Caption Problem Possible Remedy Normal time available for editing the captionsSymptom Cause Remedy TV/DVDMaintenance Disc HandlingElectrical Specifications SpecificationsGeneral Specifications Other SpecificationsMemo Consulte la figura 2 de la página Controles DE Operación Y FuncionesConsulte la figura 1 de la página Consulte la figura 3 de la páginaVisualiza el menú de títulos Púlselo para introducir el número deseadoHace una pausa en la operación del disco o la cinta Repone un ajusteConexión a Tomas DE Entrada Externa Preparación Para LA UtilizaciónInstalación DE LAS Pilas Conexión a UN SistemaPara DVD Consulte la figura 8 de la páginaPreparación DE Canales POR Primera VEZ Ajuste DEL Reloj¡La alimentación se conectará Reproducción DE UN DVD DE Vídeo O UN CD DE Audio¡La bandeja de carga del disco se abrirá Memo Memo 0EMN01945 DurationTel TD360UA