Sylvania 6727DE owner manual To Cancel the DAYLIGHT-SAVING Time

NOTE: During Auto Clock CH Search, the picture may be distorted, this is normal.

4Enter the channel number that contains the Automatic Clock Setting Signal

Press the SETUP button on the remote control.

DAYLIGHT-SAVING TIME

TV/VCR

Select this feature and the TV/VCR/DVD’s clock automatically will advance one hour in April, then reverse one hour in October.

Press the Arrow button K or L to select “SETTING CLOCK”. Press the ENTER button to enter “SETTING CLOCK” menu. Press the Arrow button K or L to select “AUTO CLOCK CH”. Press the ENTER button or the Arrow button { or B until you locate Auto Clock Set station num- ber. See step [3] on page 16.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

– SETTING CLOCK –

When Daylight-Saving Time is ON, the clock will change automatically as follows:

•First Sunday of April : At 2 AM the clock imme- diately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will not record.

•Last Sunday of October : At 2 AM the clock immediately changes to 1 AM.

Make sure ...

•Press the POWER button to turn on the TV/VCR/DVD.

– M E N U –

5Turn off the TV/VCR/DVD

Once the TV/VCR/DVD is turned off , it will period- ically check and set the correct date and time.

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH