SET UP for USE, Channel SET UP for First Time

SET UP FOR USE

TV SECTION

You can program the tuner to scan all the channels you receive in your area.

NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.

CHANNEL SET UP FOR THE

FIRST TIME

1Plug in the TV/DVD power cord

Plug the TV/DVD power cord into a standard AC outlet.

NOTE:

DELETING (OR ADDING)

CHANNEL

The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)

• If some digits appear in the corner of

1 Select “CHANNEL SET UP”

- TV SETUP -

the screen, press POWER without

B CHANNEL SET UP

Press SETUP on the remote control. V-CHIP SET UP

unplugging the power cord.

2Turn on the TV/DVD

Press POWER to turn on the TV/DVD.

Press K or L to point to “CHAN- NEL SET UP”.

Then, press ENTER.

LANGUAGE [ENGLISH] CAPTION [OFF]

3 Select the On Screen

– SET UP –

Language

Press K or L to point to “LAN-	B LANGUAGE
Press K or L to point to “LAN-	[ENGLISH] ESP FRA
GUAGE”.	AUTO PRESET

Then, press ENTER to select

“ENGLISH” or “ESP”=Spanish or

“FRA” =French. “[ ]” indicate the selected language.

	4 Begin auto preset	– SET UP –
	Press K or L to point to “AUTO	LANGUAGE
	PRESET”. Then, press ENTER.	[ENGLISH] ESP FRA
	PRESET”. Then, press ENTER.	B AUTO PRESET
	The tuner scans and memorizes all	B AUTO PRESET
	The tuner scans and memorizes all
	active channels in your area.

NOTES:

•The TV/DVD distinguishes between standard TV channels and cable(CATV) channels.

•The TV/DVD may memorize TV channels as CATV channels if reception conditions is poor. If this happens, try AUTO PRESET action again when reception conditions are better. See “CHAN- NEL SET UP AGAIN” on page 14.

5After scanning

The tuner stops on the lowest memorized channel. If you want to recall the selected channels, you can select the desired channel directly with Number or CHANNEL(CH.) K or L.

2 Select “ADD/DELETE CH”	– CHANNEL SET UP –
Press K or L to point to	B ADD / DELETE CH (TV)
“ADD/DELETE CH”.	AUTO PRESET
Then, press ENTER.

3Enter the desired channel number

Press K or L until your desired channel number appears. (You can

	also use Number or CH. K/L to	08
		ADD / DELETE
	enter it.) (Example: CH8)

4Delete (or add) it from (into) memory

Press ENTER. The channel number changes to light red. The channel is deleted from memory.

Added channel: Light blue.

Deleted channel: Light red.

•To delete another channel, repeat steps [3] and [4].

•If you press ENTER again, the channel is memo- rized again.

5Exit the channel setup mode

Press SETUP on the remote control to returns to TV mode.

NOTE: To confirm that channel(s) has been deleted or added, press CHANNEL(CH.) K or L.

– 13 –

Sylvania SC519DD SET UP for USE, Channel SET UP for First Time, Deleting or Adding Channel, Guage