Sylvania 6720FDG owner manual Auto Return, Auto REWIND-EJECT, Copying a Video Cassette

AUTO RETURN

This function allows you to automatically TV/VCR search the beginning of the recorded program(s) after timer recording finishes.

1 Press [SET-UP].		- TV/VCR SETUP -
Use [K / L] to point to		TIMER PROGRAMMING
		CHANNEL SET UP
		SETTING CLOCK
"USER’S SET UP",	B USER’S SET UP
		V-CHIP SET UP
then press [ENTER].		LANGUAGE [ENGLISH]
		ZERO RETURN
		CAPTION [OFF]
		TIME SEARCH
2 Use [K / L] to point to		INDEX SEARCH
		– USER’S SET UP –
"AUTO RETURN", then press		RENTAL	[OFF]
[ENTER] to select "ON".		REPEAT PLAY	[OFF]
	B	AUTO RETURN	[ON]

3When all the timer recordings are completed, the unit will rewind to the beginning of the recorded program(s) and then turn itself off.

NOTE:

•If you turn off the unit while rewinding the tape, the AUTO RETURN will stop.

TO CANCEL THE AUTO RETURN MODE

Repeat steps 1 to 2 and press [ENTER] to select "OFF".

•Even if any power failure occurs, the unit will retain its memory for this feature.

AUTO REWIND-EJECT	TV/VCR
• When the end of a tape is reached
during recording, playback, or fast-
forward, the tape will automatically rewind to the
beginning. After rewinding finishes, the unit will
eject the tape and turn itself off.

•This function is operative when REPEAT PLAY is set to "OFF".

•The tape will not auto-rewind during timer record- ing or One Touch Recording (OTR).

COPYING A VIDEO CASSETTE		SECTION
your enjoyment.	TV/VCR
(from another source)
You can make copies of video tapes for		TV/VCR
You CANNOT copy a DVD to a videotape.
WARNING: Unauthorized recordings of copyrighted
video tapes may be an infringement of copyright
laws.

Connect the unit and a source (for playing) device
as shown the following diagram.		RECORDING
[This unit]
Audio/Video	[Ex: Jacks of
	source device]
cables
	AUDIO
(not supplied)
		L
	OUT	IN
		R
	VIDEO
	OUT	IN

1Insert a pre-recorded video cassette into the source device (VCR, camcorder, etc.).

2Insert a video cassette to record into this unit’s cassette compartment.

3Press [SPEED] to select the desired recording speed

(SP/SLP).	SP
4 Press [SELECT] until "AUX"	AUX
appears on the screen.

5Press [REC/OTR] on the unit.

6Begin playback of the tape

in the source device.

NOTE:

•For best results during copying, use the front panel con- trols whenever possible. The remote control might affect the operation of the source device.

7To stop copying, press [STOP/EJECT CA] on the unit, then stop the playback on the source device.

21

EN