CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)
If using this TV/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/DVD out- puts a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the player up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and
Use audio coaxial digital cables available at retail for the audio connections.
Center speaker
Front speaker | Front speaker |
(left) | (right) |
ANT.
L
AUDIO OUT
R
COAXIAL
Dolby Digital decoder | To COAXIAL DIGITAL | |
| AUDIO INPUT jack | |
Surround | Surround | Subwoofer |
speaker | speaker |
|
(left) | (right) |
|
NOTES:
To DIGITAL AUDIO OUT (PCM/BITSTREAM) COAXIAL jack
[Fig. 9]
•Be sure to turn off the power to all components in the system before connecting another component.
•Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
•If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode. (See page 29 to set DOLBY DIGITAL to ON.)
•Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
Manufactured under license from Dolby Laboratories. “Dolby” and the
– 13 – | EN |