Remote Programming
DVD Codes
The remote control is programmed with DVD codes for power on/off, play, stop,
1)Find the DVD player brand from the list of codes shown below.
2)Slide the first
3)Press and hold down the DISPLAY button, then enter the first code number listed with the 10 key pad.
4)Release the DISPLAY button, and confirm the operation of the DVD player.
•If your DVD player does not respond to the first code, try the others listed. If it does not respond to any of the codes, try the search codes function on page 22.
•After you program your remote, some DVD buttons may not work properly. If so, use the DVD player’s remote.
���������� | ����� | ���������� | ����� |
���� | ��� | ��� | �������� |
���� | ��� | ����� | ��� |
����� | �������� | ������� | ��� |
|
|
|
|
������� | �������� | ����� | ��� |
|
|
|
|
��� | ��� | �������� | ��� |
|
|
|
|
������� | ��� | ���� | ���������������� |
����� | ��� |
| ��� |
|
|
|
|
���������� | ��� | �������� | ��� |
|
|
|
|
����� | ��� | ������� | ��� |
������� | ��� | ������ | ��� |
��������� | ��� | ���� | ��� |
������� | �������� | ������ | ��� |
������� | ��� | ������ | �������� |
��������
21