JVC AV-36150, AV-36120, AV-35155, AV-32150, AV-32120, AV-32115, AV-27150 Sound Settings, Bass

Page 23

Sound Settings 23

Bass

You can increase or decrease the level of low-frequency sound in the TV’s audio with the Bass adjustment.

Press the MENU button

To BASS

To increase the bass

To decrease the bass

To move to the next setting

Treble

Use Treble to adjust the level of high-frequency sound in your TV’s audio.

Press the MENU button

To TREBLE

To increase the treble

To decrease the treble

To move to the next setting

Balance

Adjust the level of sound between the TV’s two speakers with the Balance setting.

Press the MENU button

To BALANCE

To shift the balance towards the right speaker

To shift the balance towards the left speaker

To move to the next setting

MTS (Multi-Channel Television Sound)

MTS technology allows several audio signals to be broadcast at once, giving you a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may also include a Second Audio Program (SAP).

Press the MENU button

To MTS

MTS STEREO SAP MONO

ON AIR

Select the mode

(The ON AIR arrow tells you if a broadcast is in Stereo and/or contains an SAP).

•Keep the TV in STEREO mode to get the best sound quality. The sound will work in STEREO mode even if a certain broadcast is in MONO sound only.

•Choose the MONO setting to reduce excessive noise on a certain channel or broadcast.

•Selecting SAP will allow you to hear an alternative soundtrack, if one is available.

Some Sound Advice

You can tell if a program is broadcast in stereo by the position of the ON AIR arrow in the MTS menu screen. Unfortunately, while many programs are originally broadcast in stereo, some cable companies may “squash” the transmission to mono sound because they have only mono equipment. If you are connected to a cable system, the sound quality is determined by the cable company. If they broadcast only in mono, you will receive only mono sound, even if the program was aired in stereo.

Fortunately, most stereo programs are broadcast by the major television networks. If you connect an antenna to your TV instead of cable and set the tuner mode in Auto Tuner Setup to “Air” instead of “Cable” you will be able to pick up stereo broadcasts in their original stereo format

NOTES:

You can leave the Sound Settings menu at any time by pressing the EXIT button on the remote control.

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Color Television Users Guide Important Safety Precautions USE Table of Contents Connections Connections Front/Rear Panel DiagramsVideo Connections Cable and VCR ConnectionsAudio/Video Connections Connecting to an External Amplifier Connecting to a CamcorderConnecting to JVC AV Compu Link Capable Components Be sure to use only size AA batteries Getting StartedRM-C382 RM-C381 RM-C205Regular Return Key direct accessSearch Codes Function Cable Box or Satellite setup All models except AV-32115Remote Programming MGA VCR setupOnscreen Menus Using the MenuProgramming will take approximately 1 to Minutes Introduction Auto Tuner SetupPlug In Menu LanguageFinish Set ClockSet Clock Manual Channel Guard Message Menu FunctionsChannel Summary Channel Summary LockViewing Guidelines To set up the TV Parental Guideline RatingsChip ChipSpecial Note about Ratings Directions to set up Movie RatingsDirections to Block Viewing Directions to Block Unrated Programs Directions to Block Movie ViewingExample Accessing V-Chip InformationSet Lock Code Picture Settings Balance Sound SettingsBass TrebleGeneral Items On/Off TimerTimer Note for PIP Models Audio Out TV SpeakerClosed Caption Button Functions 100+ Button Hyper SurroundMuting Number Buttons 10 Key PadOnly AV-36150, AV-35115, AV-32150, AV-27150 You can select the signal source for the PIP window imageButton Functions PIP Channel +/- For PIPTroubleshooting What YOU Must do for Warranty Service Limited WarrantyToll Free 1 800 Authorized Service CentersJVC Company of America JVC CANADA, INC Specifications
Top Page Image Contents