| T R O U B L E S H O O T I N G |
|
| 19 |
|
|
| ||
|
|
| ||
|
|
|
|
|
|
|
|
|
|
PROBLEMS | CHECK |
|
|
|
There is no power | • See if the power cord became unplugged. |
|
|
|
| • Perhaps you have experienced a blown circuit breaker or fuse or a power outage. | |||
|
|
|
|
|
There is no picture | • The antenna could be disconnected. |
|
|
|
or no sound | • The input mode (TV or Video) could not be set properly, refer to page 17. |
|
|
|
| • The tuner mode (in the Auto Tuner Setup) could be set improperly, refer to page 10. | |||
| • The station may be having difficulties, check to see if other channels are operating | |||
| normally. |
|
|
|
|
|
|
|
|
Remote control is | • Check that the batteries are still working and properly installed. |
|
|
|
not operating or | • Make sure there are no objects blocking a clear path from the remote to the TV. | |||
operating properly | • Maybe you are too far from the TV, you must be within 7m. |
|
|
|
|
|
|
|
|
You cannot select | • Make sure the channels are programmed. See Channel Summary, page 14. |
|
|
|
a certain channel | • Perhaps the channel is locked, select it with the 10 key pad and follow instructions, | |||
| on page 14. |
|
|
|
|
|
|
|
|
The power turns off | • Perhaps the On/Off Timer is set, press the POWER button, check page 13. |
|
|
|
by itself | • The power was interrupted or the power cord unplugged. Reset the clock, check page 13. | |||
| • The Sleep Timer may be set. |
|
|
|
|
| |||
The clock is wrong | • The power was interrupted and the clock not reset. Reset the clock, check page 13. | |||
|
|
|
|
|
On Timer lamp is | • There is a problem with the TV. Unplug the set and call for service. |
|
|
|
blinking |
|
|
|
|
|
|
|
|
|
PICTURE | CHECK |
|
|
|
The picture color | • Tint and color may be improperly adjusted. Check page 11. |
|
|
|
quality is poor | • Video Status mode may be set to an inappropriate setting. Check page 16. |
|
|
|
|
| |||
There are lines | • There could be interference from another energy consuming appliance, such as a | |||
across the picture | computer, another TV or VCR. Move any other such appliances farther away from | |||
| the TV. |
|
|
|
|
| |||
The picture is | • There could be interference from a running high wattage appliance such as a | |||
spotted | vacuum cleaner, or neon sign. You will have to move the antenna away from the source | |||
| of the interference or change it to a coaxial cable which is less prone to interference. | |||
|
| |||
Double picture | • A building or airplane can reflect the original signal producing a second, delayed | |||
(Ghosts) | one. Adjust the antenna position. |
|
|
|
|
| |||
Snowy picture/ | • The antenna may be damaged, disconnected or turned. Check the antenna con- | |||
Image noise | nection, page 3 and page 4. If it is damaged, you will have to replace it. |
|
|
|
|
| |||
Screen is 80% black | • Closed Caption Text Mode in on. Press the CLOSED CAPTION button until you select | |||
| Off. |
|
|
|
|
|
|
|
|
SOUND | CHECK |
|
|
|
Bilingualorstereoprograms | • Make sure the MTS mode is properly set. Refer to page 12 for details on setting | |||
can not beheard | MTS Modes. |
|
|
|
|
|
|
|
|
NOT A PROBLEM | DON’T WORRY ABOUT THIS, IT’S NORMAL |
|
|
|
Static electricity | • It is normal to feel a surge of static electricity if you brush over or touch the screen. | |||
|
| |||
You hear occasional | • It is normal for the TV to emit crackling sounds when turned on or off. Unless the | |||
crackling sounds | sound or picture become abnormal, this is fine. |
|
|
|
|
|
|
|
|