VIDEO-2 SET, Picture Adjustments, Sound Adjustments

Using the TV’s menus

VIDEO-2 SET

Set the VIDEO-2 SET correctly according to the video signal input from the external device connected to the VIDEO-2 terminal. If this setting is incorrect, images will not be displayed.

1Press MENU Tto display the “MENU 2” menu, then select “VIDEO-2 SET”.

	MENU	2
	AUTO SHUTOFF	ON
	CHILD LOCK	ON
	BLUE BACK	ON
	VIDEO-2 SET	COMPONENT
SELECT BY		EXIT BY
OPERATE BY -+		DISPLAY

2Set the VIDEO-2 SET according to the video signal input from the VIDEO-2 terminal.

If a normal video signal (composite video signal) is input:

Press the MENU m buttons to select “VIDEO”.

If a component video signal (Y/CB/CR signals) is input:

Press the MENU m buttons to select “COMPONENT”.

Picture Adjustments

You can adjust the picture as you like.

1Press MENU Tto display the “MENU 4” menu.

MENU 4

TINT

COLOUR

BRIGHT

CONT.

SHARP

SELECT BY	EXIT BY
OPERATE BY -+	DISPLAY

2Press MENU Tto select an item and press MENU Mto adjust it.

TINT* - : Reddish + : Greenish

COLOUR - : Lighter + : Deeper

BRIGHT - : Darker + : Brighter

CONT. - : Lower + : Higher

SHARP - : Softer + : Sharper

*TINT (tint) is displayed only when viewing images from NTSC3.58 or NTSC4.43 colour systems.

Sound Adjustments

You can adjust the sound as you like.

1Press MENU Tto display the “MENU 5” menu.

MENU		5
BASS

TREBLE

BALANCE

AI VOLUME		ON
MONO SURROUND		ON
SELECT BY		EXIT BY
OPERATE BY -+		DISPLAY

2Press MENU Tto select an item and press MENU Mto adjust it.

TREBLE	- : Weaker	+ : Stronger
BASS	- : Weaker	+ : Stronger
BALANCE	- : Left	+ : Right