PIP button

Remote control buttons and functions

You can display sub-picture on top of main-picture.

Press this button to display sub- picture.

•When PIP button is pressed while sub-picture is displayed, sub-picture is closed.

•When TV/TEXT button is pressed while sub-picture is displayed, sub-picture is closed and TEXT screen is displayed.

•Only the sound for main-picture is audible using the headphone and the sound for sub- picture is not audible.

•When PIP button is pressed while the main-picture input soure is the same as the last sub-picture input source, the input source of sub-picture is automatically changed to the next input source.

•When PIP button is pressed while BLUE BACK function is on and main-picture is not receiving TV signal, BLUE BACK function is disabled.

•When PIP button is pressed while MENU is displayed, MENU is closed and main-picture together with sub-picture on top are displayed.

•PIP button cannot operate in COMPRESS (16:9) mode.

SUB +/– button

When the input source of sub-picture is TV mode and sub-picture is displayed, you can change the channel of sub-picture by this button.

•When the input source of sub-picture is TV mode, pressing of SUB +/– button to effect up/down of channel.

•When the input source of sub-picture is other than TV mode, SUB +/– button is disabled.

SWAP ( ) button

You can swap the input source of main and sub-pictures by this button while sub-piture is displayed.

Press this button to swap the input source of main and sub-pictures so that the image of sub-picture is displayed on main-picture and vice-versa.

INPUT ( ) button

You can select the input source of sub-picture by this button.

Press this button repeatedly to select the desired input source.

•Depending on the input source of main-picture, each press of INPUT button changes the input source of sub-picture as follows:

Main-picture: TV mode

VIDEO-1 VIDEO-2 VIDEO-3

Main-picture: VIDEO-1

TV mode VIDEO-2 VIDEO-3

Main-picture: VIDEO-2

TV mode VIDEO-1 VIDEO-3

Main-picture: VIDEO-3

TV mode VIDEO-1 VIDEO-2

•When the input source of main-picture is set to VIDEO-2 with COMPONENT, PIP button is disabled and sub-picture cannot be displayed.

•When the input source of main-picture is other than VIDEO-2 and VIDEO-2 is set to COMPONENT, the input source of sub-picture cannot select VIDEO-2.