Basic setting for picture (continued)
Adjusting the picture – USER
You can adjust the desired picture setting when selecting USER in PICTURE MODE.
1Select the USER in PICTURE MODE under PICTURE menu.
❇ MENU 
PICTURE menu 
PICTURE MODE
USER
WHITE BALANCE
You can change the white balance of the picture to better match the type of video being viewed.
Select the WHITE BALANCE in the PICTURE menu, then choose the desired setting.
❇ MENU 
PICTURE menu 
WHITE BALANCE
2Select the PICTURE SETTING in PICTURE menu, then adjust
the setting.
❇ MENU 
PICTURE menu 
PICTURE SETTING
PICTURE | 2 | : Lower | 3 | : Higher |
BRIGHT | 2 | : Darker | 3 | : Brighter |
DETAIL | 2 | : Softer | 3 | : Higher |
COLOR | 2 | : Lighter | 3 | : Deeper |
TINT* | 2 | : Reddish | 3 | : Greenish |
NORMAL | Normal white balance. |
COOL | Bluish white. |
WARM | Reddish white. |
❇About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.
*TINT can only be adjusted in NTSC system.
PICTURE BOOSTER
You can improve picture clarity when the picture is unclear due to the low signal reception.
Press the PICTURE BOOSTER button to select the desired mode.
HIGH | Perform at maximum level. |
LOW | Perform at minimum level. |
OFF | Cancel the function |
To operate this function with a menu:
❇MENU 
PICTURE menu 
PICTURE FEATURES menu
PICTURE BOOSTER
10