JVC AV-21QT4SJ manual Feature Menu

	Feature Menu
	• Press “MENU” button, now you are in main menu. In the
	main menu, select FEATURE, using “		” or “	” button.
	Then enter the feature menu,16352*5)(6281',&($785($//￿￿￿$pressing￿￿0￿￿￿￿	“	” or “ ” button.
Picture Mode
This item is used to change the picture mode. By pressing
“ ” or “ ” button you may choose one of these options:
BRIGHT, STANDARD, SOFT, MANUAL.	Sleep Timer
	The sleep timer is used to turn the TV off after a defined peri-
	od. Press “ ” or “ ” button to choose a period of time after
	selecting this item. The timer can be programmed between
	Off and 120 minutes in steps of 10 minutes. (OFF, 010, 020,
	030, 040, ......... ,120.)
	If sleep timer is activated, at the end of the selected the time,
Colour Temp	the TV goes automatically%/8((;7/&+,/'6((3$1*8*(￿￿￿￿%￿287387￿/2&7,0(5$&..to*5281'stand-by2))79(1*/,6+mode.

This item is used to change the Colour Temperature. By pressing “” or “” button you may choose one of these op- tions: COOL, WARM, NORMAL.

	Child lock:
	You can disable the control panel buttons (except the POW-
	ER button) with this item.
	Press “ ” or “ ” button to change the setting to On or Off after
Zoom	selecting this item.
This item is used to change the picture size. By pressing “ ”	When you set this item to On, the TV can be operated only
	by using the remote6((3&+,/'/(;7%/8($1*8*(control￿￿￿￿%￿287387￿/2&7,0(5$&..*5281'handset. (1*/,6+792))
or “ ” button you may choose one of these options: “AUTO”,
“4:3” and “16:9”.

• 4:3 This option forces the picture ratio to 4:3 mode.

• 16:9 This option forces the picture ratio to 16:9 mode.

•AUTO This allows to change the picture mode automati- cally, according to the transmission of the selected chan-

nel. For example, your TV is 4:3 mode, but the transmis-	Warning: If Child Lock item is set to ON, the TV can not be
sion of that channel is in 16:9 mode. If you select the AUTO
	operated by VCR.
mode, the TV is switched to 16:9 mode automatically. If the
	Language:
TV is in 4:3 mode and the picture ratio of the channel is
also 4:3, there will be no affect selecting the picture mode	Menu Language can be selected by pressing “ ” or “ ” button
to AUTO mode.
	on Language item%/8((;7/&+,/'6((3$.1*8*(￿￿￿￿%￿287387￿/2&7,0(5$&..*5281'		2))79(1*/,6+
WSS feature is only used in TV and EXT-3 modes. For the
Zoom selection in EXT-1 and EXT-2 the pin 8 (of Scart) value
is used. In RGB mode the Zoom can be “AUTO”, “4:3” and
“16:9” mode.
	Setting External Source Output
	• You can use this menu to select the internal or external
	source that will be output at EXT.2 terminal.
Zoom can be set to desired mode by RED button.	• In the “Feature” menu select “EXT-2 Output” using “			“
	or “	” button. Then select the source you want to be out-
	put at EXT.2 pressing “ ” or “ ” button (one of the sources:
	TV, EXT-1 or EXT-3 (Front AV).

ENGLISH - 9 -