JVC AV-21V311, AV-21V511, AV-21V531, AV-25V311, AV-25V511, AV-29V311, AV-29V511, AV-29V531

VIDEO-2 SET

Set the VIDEO-2 SET correctly according to the video signal input from the external device connected to the VIDEO-2 terminal. If this setting is incorrect, images will not be displayed.

1Press MENU T to display the “MENU 2” menu, then select “VIDEO-2 SET”.

2Set the VIDEO-2 SET according to the video signal input from the VIDEO-2 terminal.

If a normal video signal (composite video signal) is input:

Press the CHANNEL –/+or the MENU / buttons to select “VIDEO”.

If a component video signal (Y/CB/CR signals) is input:

Press the CHANNEL –/+or the MENU / buttons to select “COMPONENT”.

LANGUAGE

You can select the language for the on-screen display.

1Press MENU T to display the “MENU 3” menu, then select “LANGUAGE”.

2Press CHANNEL –/+ or MENU / to select language.

The on-screen display indications are in the selected language.

AUTO CH PRESET

You can automatically preset all TV channels that can be received by your TV to channels.

1Press MENU T to display the “MENU 3” menu, then select “AUTO CH PRESET”.

2Press CHANNEL –/+ or MENU / to start the AUTO CH PRESET function.

“>>>ON SEARCH” is displayed on the screen.

When all the TV channels that can be received on your TV have been preset, the display goes out and the AUTO CH PRESET function operation is completed.

To stop the AUTO CH PRESET:

Press the CHANNEL –/+or the MENU / buttons.

•The AUTO CH PRESET function does not preset a TV channel to the AV channel (channel number 0).

•If the TV cannot preset the TV channel you want to view, preset it manually. For details, see “MANUAL CH PRESET” on page 16.