Connections
Connecting to JVC AV Compu Link
JVC’s AV Compu Link feature makes playing video tapes or DVDs totally automatic. Simply insert a
AV- CompuLink, the VCR or DVD player sends a signal to the television telling it to turn on and switch to the proper video input
•The AV Compu Link cable may be included with the JVC AV Compu Link accessory you wish to connect.If it is not, contact an authorized JVC Service Center for
part # EWP
•AV Compu Link can only be used with
VCR or DVD player
Illustration of AV-32D503
To Connect: Plug one end of the AV Compu Link cable into the AV Compu Link input on your VCR, DVD, or other Compu Link device. Plug the other end of the AV Compu Link cable into the AV Compu Link input at the rear of the television.
NOTES:
•In order for the VCR playback to begin automatically, the recording tabs must be removed from the VHS tape. If the tab is in place, automatic switching will occur when you push the VCR’s PLAY button.
•The AV Compu Link cable has a male 3.5 mm (mono) plug on each end.
•If your
•To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the HiFi’s connection instructions for detailed connection information.
•AV COMPU LINK III is compatible with select AV CompuLink receivers.
18