Features
4Press / to choose a channel, then press the blue button.
The (locked) mark appears, and the chosen channel is locked.
•To cancel the Child Lock, press the blue button again.
•Repeat step 4 to lock all channels which you want to lock.
5Press OK .
This completes the setting.
Notes:
•You cannot choose a locked channel using the /
buttons on the remote control nor the P buttons on the TV.
•Even if a locked channel is displayed, the programme cannot be watched.
■To watch a locked channel
1Press the number buttons to choose a locked channel.
The (locked) mark appears.
2Press (Information).
The ID No. input menu appears.
3Press the number buttons to enter the ID number.
The locked channel can now be watched.
If you forget the ID number:
Do steps 1 of “To set the Child Lock”. After confirming the ID number, press TV to exit the menu.
Decoder (EXT-2)
When you connect a Decoder to a
1Choose a scrambled channel.
The scrambled picture appears.
•If the picture is unscrambled you don’t need to change the Decoder
2 | Press | OK | to display MENU. Then Press / |
| to choose FEATURES. | ||
3 | Press | OK | to display the Features menu. |
4Press / to choose DECODER
5Press / to choose ON.
6Press OK .
The
7 Press OK .
The translation of channel data from the TV to the VCR begins. The display disappears once the data transmission ends.
•Repeat steps 1 to 7 watch a different channel using the decoder.
Note:
•Depending on the type of VCR, the display may change once data transmission ends.
In this case, refer to the VCR’s manual.
22