LUHFW#5HF | JVC AV32L2EU, AV28L2EU, AV32X10EU, AV28X10EU, AV28WH5EU

709#/,1.#)81&7,216

When a T-V LINK compatible VCR is connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features:

To use T-V LINK functions:

A T-V LINK compatible VCR is necessary.

The VCR must be connected to the EXT-2 terminal on the TV by a fully wired SCART cable.

Note:

∙A “T-V LINK compatible VCR” means a JVC VCR with the T-V LINK logo or a VCR with one of the following logos. However, these VCRs may support some or all of the fea- tures described below. For details, refer to your VCR in- struction manual.

“Q-LINK” (a trademark of Panasonic Corporation) “Data Logic” (a trademark of Metz Corporation) “Easy Link” (a trademark of Phillips Corporation) “Megalogic” (a trademark of Grundig Corporation) “SMARTLINK” (a trademark of Sony Corporation)

■3UH0VHW#'RZQORDG

Download the registered data on the TV channels from the TV to the VCR.

The Preset Download function automatically begins when the initial setting is complete or whenever the AUTO PROGRAM or EDIT/MANUAL operations are performed.

Note:

∙This function can be operated via VCR operation.

When “FEATURE NOT AVAILABLE” is displayed:

If “FEATURE NOT AVAILABLE” is displayed, the download was not performed correctly. Before trying to download again, ensure the following:

∙The VCR power is turned on.

∙The VCR is T-V LINK compatible.

∙The VCR is connected to the EXT-2 terminal.

∙The SCART cable is fully wired.

■'LUHFW#5HF

“What You See Is What You Record”

You can record to VCR the images that you are currently viewing on TV by a simple operation.

For details, read the manual for your VCR.

Operate via the VCR. “VCR IS RECORDING” is displayed.

In the following conditions, the VCR will stop recording if the TV is turned off, if the TV channel or input is switched, or if the menu is displayed on the TV:

∙When recording images from an external device connected to the TV.

∙When recording a TV channel after it has been unscrambled on a decoder.

∙When recording a TV channel by using the TV’s output be- cause that TV channel cannot be properly received on the VCR’s tuner.

Note:

∙Operation via the TV is not possible.

∙Generally, the VCR cannot record a TV channel that can- not be received properly by the VCR’s tuner, even though you can view that TV channel on the TV. However, some VCRs can record a TV channel by using the TV’s output if that channel can be viewed on the TV, even though the TV channel cannot be received properly by the VCR’s tuner. For details, refer to your VCR instruction manual.

■79#$XWR#3RZHU#2Q29&5#

,PDJH#9LHZ

When the VCR starts playing, the TV automatically turns on and the images from EXT-2 terminal are displayed on the screen.

When the VCR menu is operated, the TV automatically turns on and the images from EXT-2 terminal are displayed on the screen.

Note:

∙This function does not operate if your TV’s main power is turned off. Set your TV’s main power to on (standby mode).

ENGLISH