Remote control buttons and functions
5Information button
You can display the PR LIST or the current time on the screen.
Press the h(information) button
Pressing the h(information) button changes the display as follows:
Current time
No display
•You can choose programme numbers (PR) or EXT terminals with the PR LIST. For details, see “Use the PR LIST:” on page 8.
•This TV uses teletext data to set the time. If the TV has not received a TV channel that has teletext programmes since it was turned on, the time display is blank. To see the time, choose a TV channel that has teletext programmes. The time will still be displayed as long as you do not turn off the TV, even if you choose other TV channels.
•When watching videos, the incorrect time is sometimes displayed.
•The h(information) button will also operate menus. For details, see “Using the TV’s menus” on page 16.
6TV button
You can return to a TV channel instantly.
Press the bbutton.
The TV returns to the TV mode and a TV channel appears.
•The bbutton will also operate menus. For details, see “Using the TV’s menus” on page 16.
75 Buttons
You can adjust the volume.
Press the 5 buttons to adjust the sound.
•The 5 buttons will also operate menus. For details, see “Using the TV’s menus” on page 16.
8Standby button
Press the #(standby) button to turn the TV on or off.
When the TV is turned on, the power lamp changes from red to green.
9Colour buttons
The colour buttons are used for the teletext operations or the menu operations. For details, see “~ Teletext control buttons and VCR P DVD switch” on page 14 or “Using the TV’s menus” on page 16.
0OK button
The abutton is used to operate menus. For details, see “Using the TV’s menus” on page 16.
-6 Buttons
You can choose a programme number (PR) or an EXT terminal.
Press the 6 buttons to choose a
Programme number (PR) or an EXT terminal.
The 6 buttons will also operate menus.
For details, see “Using the TV’s menus” on page 16.
=VCR/DVD control buttons and
VCR P DVD switch
These buttons will operate a JVC brand VCR or DVD player. Pressing a button that looks the same as the device’s original remote control button has the same effect as the original remote control.
1Set the VCR P DVD switch to the VCR or DVD position.
VCR:
When you are using a VCR, set the switch to the VCR position.
DVD:
When you are using a DVD player, set the switch to the DVD position.
2Press the VCR/DVD control button to control your VCR or DVD player
•If your device is not made by JVC, these buttons will not work.
•Even if your device is made by JVC, some of these buttons may not work, depending on the device you are using.
•You can use the p buttons to choose a TV channel the VCR will receive, or choose the chapter the DVD player plays back.
•Some models of DVD player use the p buttons for both operating the fast forward/backward functions
and for choosing the chapter. In this case, the 253 buttons do not work.
13