Sound Adjust
Sound Settings
These settings allow you to change and adjust the sound on your television.
Bass – You can increase or decrease the level of
Treble – Use treble to adjust the level of
Balance – Adjust the level of sound between the TV’s left and right speakers with the balance setting.
Adjust the Sound Settings
| Press the MENU button |
π† | To "Sound Adjust" |
è | To enter |
π† | To "Bass", "Treble" or "Balance" |
è To adjust the setting
π† To move to the next setting
Press the MENU button when finished
Sound Adjust
Bass | 0 |
|
|
|
|
Treble | 0 |
|
|
|
|
|
|
|
Balance | 0 |
|
Optical Out |
| PCM |
|
Turn On Volume | Current |
| |
Volume Limit |
| 20 |
|
|
| Reset |
|
| Back |
| MENU |
Select | Operate | Back | Exit |
Notes:
•You can reset all sound adjustments you set at once as the default setting when you select reset. See page 38.
Optical Out
You can select the optical digital sound output, either PCM or Dolby Digital when your TV is connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can enjoy listening in 5.1ch sound when watching digital broadcasts.
Press the MENU button
π† To "Sound Adjust" √® To enter
π† To "Optical Out"
è To select "PCM" or "DOLBY DIGITAL"
Press the MENU button when finished
Sound Adjust
Bass | 0 |
|
|
|
|
|
|
|
Treble | 0 |
|
|
|
|
|
|
|
Balance | 0 |
|
Optical Out |
| PCM |
|
Turn On Volume | Current |
| |
Volume Limit |
| 30 |
|
|
| Reset |
|
| Back | MENU |
|
Select | Operate | Back | Exit |
Notes:
•If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it cannot output the sound from the speakers.
•For connecting an amplifier using the optical output, see page 15.
Manufactured under license from Dolby Laboratories. "Dolby", and the
39